17.3. `ssl` — TLS/SSL wrapper for socket objects¶

New in version 2.6.

Source code: Lib/ssl.py

This module provides access to Transport Layer Security (often known as “Secure Sockets Layer”) encryption and peer authentication facilities for network sockets, both client-side and server-side. This module uses the OpenSSL library. It is available on all modern Unix systems, Windows, Mac OS X, and probably additional platforms, as long as OpenSSL is installed on that platform.

Changed in version 2.7.13: Updated to support linking with OpenSSL 1.1.0

Note

Some behavior may be platform dependent, since calls are made to the operating system socket APIs. The installed version of OpenSSL may also cause variations in behavior. For example, TLSv1.1 and TLSv1.2 come with openssl version 1.0.1.

Warning

Don’t use this module without reading the Security considerations. Doing so may lead to a false sense of security, as the default settings of the ssl module are not necessarily appropriate for your application.

This section documents the objects and functions in the ssl module; for more general information about TLS, SSL, and certificates, the reader is referred to the documents in the “See Also” section at the bottom.

This module provides a class, ssl.SSLSocket, which is derived from the socket.socket type, and provides a socket-like wrapper that also encrypts and decrypts the data going over the socket with SSL. It supports additional methods such as getpeercert(), which retrieves the certificate of the other side of the connection, and cipher(),which retrieves the cipher being used for the secure connection.

For more sophisticated applications, the ssl.SSLContext class helps manage settings and certificates, which can then be inherited by SSL sockets created through the SSLContext.wrap_socket() method.

17.3.1. Functions, Constants, and Exceptions¶

exception ssl.SSLError¶

Raised to signal an error from the underlying SSL implementation (currently provided by the OpenSSL library). This signifies some problem in the higher-level encryption and authentication layer that’s superimposed on the underlying network connection. This error is a subtype of socket.error, which in turn is a subtype of IOError. The error code and message of SSLError instances are provided by the OpenSSL library.

library¶: A string mnemonic designating the OpenSSL submodule in which the error occurred, such as SSL, PEM or X509. The range of possible values depends on the OpenSSL version.

New in version 2.7.9.

reason¶: A string mnemonic designating the reason this error occurred, for example CERTIFICATE_VERIFY_FAILED. The range of possible values depends on the OpenSSL version.

New in version 2.7.9.

exception ssl.SSLZeroReturnError¶: A subclass of SSLError raised when trying to read or write and the SSL connection has been closed cleanly. Note that this doesn’t mean that the underlying transport (read TCP) has been closed.

New in version 2.7.9.

exception ssl.SSLWantReadError¶: A subclass of SSLError raised by a non-blocking SSL socket when trying to read or write data, but more data needs to be received on the underlying TCP transport before the request can be fulfilled.

New in version 2.7.9.

exception ssl.SSLWantWriteError¶: A subclass of SSLError raised by a non-blocking SSL socket when trying to read or write data, but more data needs to be sent on the underlying TCP transport before the request can be fulfilled.

New in version 2.7.9.

exception ssl.SSLSyscallError¶: A subclass of SSLError raised when a system error was encountered while trying to fulfill an operation on a SSL socket. Unfortunately, there is no easy way to inspect the original errno number.

New in version 2.7.9.

exception ssl.SSLEOFError¶: A subclass of SSLError raised when the SSL connection has been terminated abruptly. Generally, you shouldn’t try to reuse the underlying transport when this error is encountered.

New in version 2.7.9.

exception ssl.CertificateError¶: Raised to signal an error with a certificate (such as mismatching hostname). Certificate errors detected by OpenSSL, though, raise an SSLError.

17.3.1.1. Socket creation¶

The following function allows for standalone socket creation. Starting from Python 2.7.9, it can be more flexible to use SSLContext.wrap_socket() instead.

ssl.wrap_socket(sock, keyfile=None, certfile=None, server_side=False, cert_reqs=CERT_NONE, ssl_version={see docs}, ca_certs=None, do_handshake_on_connect=True, suppress_ragged_eofs=True, ciphers=None)¶

Takes an instance sock of socket.socket, and returns an instance of ssl.SSLSocket, a subtype of socket.socket, which wraps the underlying socket in an SSL context. sock must be a SOCK_STREAM socket; other socket types are unsupported.

For client-side sockets, the context construction is lazy; if the underlying socket isn’t connected yet, the context construction will be performed after connect() is called on the socket. For server-side sockets, if the socket has no remote peer, it is assumed to be a listening socket, and the server-side SSL wrapping is automatically performed on client connections accepted via the accept() method. wrap_socket() may raise SSLError.

The keyfile and certfile parameters specify optional files which contain a certificate to be used to identify the local side of the connection. See the discussion of Certificates for more information on how the certificate is stored in the certfile.

The parameter server_side is a boolean which identifies whether server-side or client-side behavior is desired from this socket.

The parameter cert_reqs specifies whether a certificate is required from the other side of the connection, and whether it will be validated if provided. It must be one of the three values CERT_NONE (certificates ignored), CERT_OPTIONAL (not required, but validated if provided), or CERT_REQUIRED (required and validated). If the value of this parameter is not CERT_NONE, then the ca_certs parameter must point to a file of CA certificates.

The ca_certs file contains a set of concatenated “certification authority” certificates, which are used to validate certificates passed from the other end of the connection. See the discussion of Certificates for more information about how to arrange the certificates in this file.

The parameter ssl_version specifies which version of the SSL protocol to use. Typically, the server chooses a particular protocol version, and the client must adapt to the server’s choice. Most of the versions are not interoperable with the other versions. If not specified, the default is PROTOCOL_SSLv23; it provides the most compatibility with other versions.

Here’s a table showing which versions in a client (down the side) can connect to which versions in a server (along the top):

client / server SSLv2 SSLv3 SSLv23 TLSv1 TLSv1.1 TLSv1.2

SSLv2 yes no yes no no no

SSLv3 no yes yes no no no

SSLv23 [1] no yes yes yes yes yes

TLSv1 no no yes yes no no

TLSv1.1 no no yes no yes no

TLSv1.2 no no yes no no yes

Footnotes

[1]	TLS 1.3 protocol will be available with `PROTOCOL_SSLv23` in OpenSSL >= 1.1.1. There is no dedicated PROTOCOL constant for just TLS 1.3.

Note

Which connections succeed will vary depending on the version of OpenSSL. For example, before OpenSSL 1.0.0, an SSLv23 client would always attempt SSLv2 connections.

The ciphers parameter sets the available ciphers for this SSL object. It should be a string in the OpenSSL cipher list format.

The parameter do_handshake_on_connect specifies whether to do the SSL handshake automatically after doing a socket.connect(), or whether the application program will call it explicitly, by invoking the SSLSocket.do_handshake() method. Calling SSLSocket.do_handshake() explicitly gives the program control over the blocking behavior of the socket I/O involved in the handshake.

The parameter suppress_ragged_eofs specifies how the SSLSocket.read() method should signal unexpected EOF from the other end of the connection. If specified as True (the default), it returns a normal EOF (an empty bytes object) in response to unexpected EOF errors raised from the underlying socket; if False, it will raise the exceptions back to the caller.

Changed in version 2.7: New optional argument ciphers.

17.3.1.2. Context creation¶

A convenience function helps create SSLContext objects for common purposes.

ssl.create_default_context(purpose=Purpose.SERVER_AUTH, cafile=None, capath=None, cadata=None)¶

Return a new SSLContext object with default settings for the given purpose. The settings are chosen by the ssl module, and usually represent a higher security level than when calling the SSLContext constructor directly.

cafile, capath, cadata represent optional CA certificates to trust for certificate verification, as in SSLContext.load_verify_locations(). If all three are None, this function can choose to trust the system’s default CA certificates instead.

The settings are: PROTOCOL_SSLv23, OP_NO_SSLv2, and OP_NO_SSLv3 with high encryption cipher suites without RC4 and without unauthenticated cipher suites. Passing SERVER_AUTH as purpose sets verify_mode to CERT_REQUIRED and either loads CA certificates (when at least one of cafile, capath or cadata is given) or uses SSLContext.load_default_certs() to load default CA certificates.

Note

The protocol, options, cipher and other settings may change to more restrictive values anytime without prior deprecation. The values represent a fair balance between compatibility and security.

If your application needs specific settings, you should create a SSLContext and apply the settings yourself.

Note

If you find that when certain older clients or servers attempt to connect with a SSLContext created by this function that they get an error stating “Protocol or cipher suite mismatch”, it may be that they only support SSL3.0 which this function excludes using the OP_NO_SSLv3. SSL3.0 is widely considered to be completely broken. If you still wish to continue to use this function but still allow SSL 3.0 connections you can re-enable them using:

ctx = ssl.create_default_context(Purpose.CLIENT_AUTH)
ctx.options &= ~ssl.OP_NO_SSLv3

New in version 2.7.9.

Changed in version 2.7.10: RC4 was dropped from the default cipher string.

Changed in version 2.7.13: ChaCha20/Poly1305 was added to the default cipher string.

3DES was dropped from the default cipher string.

ssl._https_verify_certificates(enable=True)¶

Specifies whether or not server certificates are verified when creating client HTTPS connections without specifying a particular SSL context.

Starting with Python 2.7.9, httplib and modules which use it, such as urllib2 and xmlrpclib, default to verifying remote server certificates received when establishing client HTTPS connections. This default verification checks that the certificate is signed by a Certificate Authority in the system trust store and that the Common Name (or Subject Alternate Name) on the presented certificate matches the requested host.

Setting enable to True ensures this default behaviour is in effect.

Setting enable to False reverts the default HTTPS certificate handling to that of Python 2.7.8 and earlier, allowing connections to servers using self-signed certificates, servers using certificates signed by a Certicate Authority not present in the system trust store, and servers where the hostname does not match the presented server certificate.

The leading underscore on this function denotes that it intentionally does not exist in any implementation of Python 3 and may not be present in all Python 2.7 implementations. The portable approach to bypassing certificate checks or the system trust store when necessary is for tools to enable that on a case-by-case basis by explicitly passing in a suitably configured SSL context, rather than reverting the default behaviour of the standard library client modules.

New in version 2.7.12.

17.3.1.3. Random generation¶

Deprecated since version 2.7.13: OpenSSL has deprecated ssl.RAND_pseudo_bytes(), use ssl.RAND_bytes() instead.

ssl.RAND_status()¶: Return True if the SSL pseudo-random number generator has been seeded with ‘enough’ randomness, and False otherwise. You can use ssl.RAND_egd() and ssl.RAND_add() to increase the randomness of the pseudo-random number generator.

ssl.RAND_egd(path)¶

If you are running an entropy-gathering daemon (EGD) somewhere, and path is the pathname of a socket connection open to it, this will read 256 bytes of randomness from the socket, and add it to the SSL pseudo-random number generator to increase the security of generated secret keys. This is typically only necessary on systems without better sources of randomness.

See http://egd.sourceforge.net/ or http://prngd.sourceforge.net/ for sources of entropy-gathering daemons.

Availability: not available with LibreSSL and OpenSSL > 1.1.0

ssl.RAND_add(bytes, entropy)¶: Mix the given bytes into the SSL pseudo-random number generator. The parameter entropy (a float) is a lower bound on the entropy contained in string (so you can always use 0.0). See RFC 1750 for more information on sources of entropy.

17.3.1.4. Certificate handling¶

ssl.match_hostname(cert, hostname)¶

Verify that cert (in decoded format as returned by SSLSocket.getpeercert()) matches the given hostname. The rules applied are those for checking the identity of HTTPS servers as outlined in RFC 2818 and RFC 6125, except that IP addresses are not currently supported. In addition to HTTPS, this function should be suitable for checking the identity of servers in various SSL-based protocols such as FTPS, IMAPS, POPS and others.

CertificateError is raised on failure. On success, the function returns nothing:

>>> cert = {'subject': ((('commonName', 'example.com'),),)}
>>> ssl.match_hostname(cert, "example.com")
>>> ssl.match_hostname(cert, "example.org")
Traceback (most recent call last):
  File "<stdin>", line 1, in <module>
  File "/home/py3k/Lib/ssl.py", line 130, in match_hostname
ssl.CertificateError: hostname 'example.org' doesn't match 'example.com'

New in version 2.7.9.

ssl.cert_time_to_seconds(cert_time)¶

Return the time in seconds since the Epoch, given the cert_time string representing the “notBefore” or “notAfter” date from a certificate in "%b %d %H:%M:%S %Y %Z" strptime format (C locale).

Here’s an example:

>>> import ssl
>>> timestamp = ssl.cert_time_to_seconds("Jan  5 09:34:43 2018 GMT")
>>> timestamp
1515144883
>>> from datetime import datetime
>>> print(datetime.utcfromtimestamp(timestamp))
2018-01-05 09:34:43

“notBefore” or “notAfter” dates must use GMT (RFC 5280).

Changed in version 2.7.9: Interpret the input time as a time in UTC as specified by ‘GMT’ timezone in the input string. Local timezone was used previously. Return an integer (no fractions of a second in the input format)

ssl.get_server_certificate(addr, ssl_version=PROTOCOL_SSLv23, ca_certs=None)¶: Given the address addr of an SSL-protected server, as a (hostname, port-number) pair, fetches the server’s certificate, and returns it as a PEM-encoded string. If ssl_version is specified, uses that version of the SSL protocol to attempt to connect to the server. If ca_certs is specified, it should be a file containing a list of root certificates, the same format as used for the same parameter in wrap_socket(). The call will attempt to validate the server certificate against that set of root certificates, and will fail if the validation attempt fails.

Changed in version 2.7.9: This function is now IPv6-compatible, and the default ssl_version is changed from PROTOCOL_SSLv3 to PROTOCOL_SSLv23 for maximum compatibility with modern servers.

ssl.DER_cert_to_PEM_cert(DER_cert_bytes)¶: Given a certificate as a DER-encoded blob of bytes, returns a PEM-encoded string version of the same certificate.

ssl.PEM_cert_to_DER_cert(PEM_cert_string)¶: Given a certificate as an ASCII PEM string, returns a DER-encoded sequence of bytes for that same certificate.

ssl.get_default_verify_paths()¶

Returns a named tuple with paths to OpenSSL’s default cafile and capath. The paths are the same as used by SSLContext.set_default_verify_paths(). The return value is a named tuple DefaultVerifyPaths:

cafile - resolved path to cafile or None if the file doesn’t exist,
capath - resolved path to capath or None if the directory doesn’t exist,
openssl_cafile_env - OpenSSL’s environment key that points to a cafile,
openssl_cafile - hard coded path to a cafile,
openssl_capath_env - OpenSSL’s environment key that points to a capath,
openssl_capath - hard coded path to a capath directory

Availability: LibreSSL ignores the environment vars openssl_cafile_env and openssl_capath_env

New in version 2.7.9.

ssl.enum_certificates(store_name)¶

Retrieve certificates from Windows’ system cert store. store_name may be one of CA, ROOT or MY. Windows may provide additional cert stores, too.

The function returns a list of (cert_bytes, encoding_type, trust) tuples. The encoding_type specifies the encoding of cert_bytes. It is either x509_asn for X.509 ASN.1 data or pkcs_7_asn for PKCS#7 ASN.1 data. Trust specifies the purpose of the certificate as a set of OIDS or exactly True if the certificate is trustworthy for all purposes.

Example:

>>> ssl.enum_certificates("CA")
[(b'data...', 'x509_asn', {'1.3.6.1.5.5.7.3.1', '1.3.6.1.5.5.7.3.2'}),
 (b'data...', 'x509_asn', True)]

Availability: Windows.

New in version 2.7.9.

ssl.enum_crls(store_name)¶

Retrieve CRLs from Windows’ system cert store. store_name may be one of CA, ROOT or MY. Windows may provide additional cert stores, too.

The function returns a list of (cert_bytes, encoding_type, trust) tuples. The encoding_type specifies the encoding of cert_bytes. It is either x509_asn for X.509 ASN.1 data or pkcs_7_asn for PKCS#7 ASN.1 data.

Availability: Windows.

New in version 2.7.9.

17.3.1.5. Constants¶

ssl.CERT_NONE¶

Possible value for SSLContext.verify_mode, or the cert_reqs parameter to wrap_socket(). In this mode (the default), no certificates will be required from the other side of the socket connection. If a certificate is received from the other end, no attempt to validate it is made.

See the discussion of Security considerations below.

ssl.CERT_OPTIONAL¶

Possible value for SSLContext.verify_mode, or the cert_reqs parameter to wrap_socket(). In this mode no certificates will be required from the other side of the socket connection; but if they are provided, validation will be attempted and an SSLError will be raised on failure.

Use of this setting requires a valid set of CA certificates to be passed, either to SSLContext.load_verify_locations() or as a value of the ca_certs parameter to wrap_socket().

ssl.CERT_REQUIRED¶

Possible value for SSLContext.verify_mode, or the cert_reqs parameter to wrap_socket(). In this mode, certificates are required from the other side of the socket connection; an SSLError will be raised if no certificate is provided, or if its validation fails.

Use of this setting requires a valid set of CA certificates to be passed, either to SSLContext.load_verify_locations() or as a value of the ca_certs parameter to wrap_socket().

ssl.VERIFY_DEFAULT¶: Possible value for SSLContext.verify_flags. In this mode, certificate revocation lists (CRLs) are not checked. By default OpenSSL does neither require nor verify CRLs.

New in version 2.7.9.

ssl.VERIFY_CRL_CHECK_LEAF¶: Possible value for SSLContext.verify_flags. In this mode, only the peer cert is check but non of the intermediate CA certificates. The mode requires a valid CRL that is signed by the peer cert’s issuer (its direct ancestor CA). If no proper has been loaded SSLContext.load_verify_locations, validation will fail.

New in version 2.7.9.

ssl.VERIFY_CRL_CHECK_CHAIN¶: Possible value for SSLContext.verify_flags. In this mode, CRLs of all certificates in the peer cert chain are checked.

New in version 2.7.9.

ssl.VERIFY_X509_STRICT¶: Possible value for SSLContext.verify_flags to disable workarounds for broken X.509 certificates.

New in version 2.7.9.

ssl.VERIFY_X509_TRUSTED_FIRST¶: Possible value for SSLContext.verify_flags. It instructs OpenSSL to prefer trusted certificates when building the trust chain to validate a certificate. This flag is enabled by default.

New in version 2.7.10.

ssl.PROTOCOL_TLS¶: Selects the highest protocol version that both the client and server support. Despite the name, this option can select “TLS” protocols as well as “SSL”.

New in version 2.7.13.

ssl.PROTOCOL_SSLv23¶: Alias for PROTOCOL_TLS.

Deprecated since version 2.7.13: Use PROTOCOL_TLS instead.

ssl.PROTOCOL_SSLv2¶

Selects SSL version 2 as the channel encryption protocol.

This protocol is not available if OpenSSL is compiled with the OPENSSL_NO_SSL2 flag.

Warning

SSL version 2 is insecure. Its use is highly discouraged.

Deprecated since version 2.7.13: OpenSSL has removed support for SSLv2.

ssl.PROTOCOL_SSLv3¶

Selects SSL version 3 as the channel encryption protocol.

This protocol is not be available if OpenSSL is compiled with the OPENSSL_NO_SSLv3 flag.

Warning

SSL version 3 is insecure. Its use is highly discouraged.

Deprecated since version 2.7.13: OpenSSL has deprecated all version specific protocols. Use the default protocol with flags like OP_NO_SSLv3 instead.

ssl.PROTOCOL_TLSv1¶: Selects TLS version 1.0 as the channel encryption protocol.

Deprecated since version 2.7.13: OpenSSL has deprecated all version specific protocols. Use the default protocol with flags like OP_NO_SSLv3 instead.

ssl.PROTOCOL_TLSv1_1¶: Selects TLS version 1.1 as the channel encryption protocol. Available only with openssl version 1.0.1+.

New in version 2.7.9.

Deprecated since version 2.7.13: OpenSSL has deprecated all version specific protocols. Use the default protocol with flags like OP_NO_SSLv3 instead.

ssl.PROTOCOL_TLSv1_2¶: Selects TLS version 1.2 as the channel encryption protocol. This is the most modern version, and probably the best choice for maximum protection, if both sides can speak it. Available only with openssl version 1.0.1+.

New in version 2.7.9.

Deprecated since version 2.7.13: OpenSSL has deprecated all version specific protocols. Use the default protocol with flags like OP_NO_SSLv3 instead.

ssl.OP_ALL¶: Enables workarounds for various bugs present in other SSL implementations. This option is set by default. It does not necessarily set the same flags as OpenSSL’s SSL_OP_ALL constant.

New in version 2.7.9.

ssl.OP_NO_SSLv2¶: Prevents an SSLv2 connection. This option is only applicable in conjunction with PROTOCOL_SSLv23. It prevents the peers from choosing SSLv2 as the protocol version.

New in version 2.7.9.

ssl.OP_NO_SSLv3¶: Prevents an SSLv3 connection. This option is only applicable in conjunction with PROTOCOL_SSLv23. It prevents the peers from choosing SSLv3 as the protocol version.

New in version 2.7.9.

ssl.OP_NO_TLSv1¶: Prevents a TLSv1 connection. This option is only applicable in conjunction with PROTOCOL_SSLv23. It prevents the peers from choosing TLSv1 as the protocol version.

New in version 2.7.9.

ssl.OP_NO_TLSv1_1¶: Prevents a TLSv1.1 connection. This option is only applicable in conjunction with PROTOCOL_SSLv23. It prevents the peers from choosing TLSv1.1 as the protocol version. Available only with openssl version 1.0.1+.

New in version 2.7.9.

ssl.OP_NO_TLSv1_2¶: Prevents a TLSv1.2 connection. This option is only applicable in conjunction with PROTOCOL_SSLv23. It prevents the peers from choosing TLSv1.2 as the protocol version. Available only with openssl version 1.0.1+.

New in version 2.7.9.

ssl.OP_NO_TLSv1_3¶: Prevents a TLSv1.3 connection. This option is only applicable in conjunction with PROTOCOL_TLS. It prevents the peers from choosing TLSv1.3 as the protocol version. TLS 1.3 is available with OpenSSL 1.1.1 or later. When Python has been compiled against an older version of OpenSSL, the flag defaults to 0.

New in version 2.7.15.

ssl.OP_CIPHER_SERVER_PREFERENCE¶: Use the server’s cipher ordering preference, rather than the client’s. This option has no effect on client sockets and SSLv2 server sockets.

New in version 2.7.9.

ssl.OP_SINGLE_DH_USE¶: Prevents re-use of the same DH key for distinct SSL sessions. This improves forward secrecy but requires more computational resources. This option only applies to server sockets.

New in version 2.7.9.

ssl.OP_SINGLE_ECDH_USE¶: Prevents re-use of the same ECDH key for distinct SSL sessions. This improves forward secrecy but requires more computational resources. This option only applies to server sockets.

New in version 2.7.9.

ssl.OP_ENABLE_MIDDLEBOX_COMPAT¶

Send dummy Change Cipher Spec (CCS) messages in TLS 1.3 handshake to make a TLS 1.3 connection look more like a TLS 1.2 connection.

This option is only available with OpenSSL 1.1.1 and later.

New in version 2.7.16.

ssl.OP_NO_COMPRESSION¶

Disable compression on the SSL channel. This is useful if the application protocol supports its own compression scheme.

This option is only available with OpenSSL 1.0.0 and later.

New in version 2.7.9.

ssl.HAS_ALPN¶: Whether the OpenSSL library has built-in support for the Application-Layer Protocol Negotiation TLS extension as described in RFC 7301.

New in version 2.7.10.

ssl.HAS_ECDH¶: Whether the OpenSSL library has built-in support for Elliptic Curve-based Diffie-Hellman key exchange. This should be true unless the feature was explicitly disabled by the distributor.

New in version 2.7.9.

ssl.HAS_SNI¶: Whether the OpenSSL library has built-in support for the Server Name Indication extension (as defined in RFC 4366).

New in version 2.7.9.

ssl.HAS_NPN¶: Whether the OpenSSL library has built-in support for Next Protocol Negotiation as described in the NPN draft specification. When true, you can use the SSLContext.set_npn_protocols() method to advertise which protocols you want to support.

New in version 2.7.9.

ssl.HAS_TLSv1_3¶: Whether the OpenSSL library has built-in support for the TLS 1.3 protocol.

New in version 2.7.15.

ssl.CHANNEL_BINDING_TYPES¶: List of supported TLS channel binding types. Strings in this list can be used as arguments to SSLSocket.get_channel_binding().

New in version 2.7.9.

ssl.OPENSSL_VERSION¶

The version string of the OpenSSL library loaded by the interpreter:

>>> ssl.OPENSSL_VERSION
'OpenSSL 0.9.8k 25 Mar 2009'

New in version 2.7.

ssl.OPENSSL_VERSION_INFO¶

A tuple of five integers representing version information about the OpenSSL library:

>>> ssl.OPENSSL_VERSION_INFO
(0, 9, 8, 11, 15)

New in version 2.7.

ssl.OPENSSL_VERSION_NUMBER¶

The raw version number of the OpenSSL library, as a single integer:

>>> ssl.OPENSSL_VERSION_NUMBER
9470143L
>>> hex(ssl.OPENSSL_VERSION_NUMBER)
'0x9080bfL'

New in version 2.7.

ssl.ALERT_DESCRIPTION_HANDSHAKE_FAILURE¶

ssl.ALERT_DESCRIPTION_INTERNAL_ERROR¶

ALERT_DESCRIPTION_*

Alert Descriptions from RFC 5246 and others. The IANA TLS Alert Registry contains this list and references to the RFCs where their meaning is defined.

Used as the return value of the callback function in SSLContext.set_servername_callback().

New in version 2.7.9.

Purpose.SERVER_AUTH¶: Option for create_default_context() and SSLContext.load_default_certs(). This value indicates that the context may be used to authenticate Web servers (therefore, it will be used to create client-side sockets).

New in version 2.7.9.

Purpose.CLIENT_AUTH¶: Option for create_default_context() and SSLContext.load_default_certs(). This value indicates that the context may be used to authenticate Web clients (therefore, it will be used to create server-side sockets).

New in version 2.7.9.

17.3.2. SSL Sockets¶

SSL sockets provide the following methods of Socket Objects:

accept()
bind()
close()
connect()
fileno()
getpeername(), getsockname()
getsockopt(), setsockopt()
gettimeout(), settimeout(), setblocking()
listen()
makefile()
recv(), recv_into() (but passing a non-zero flags argument is not allowed)
send(), sendall() (with the same limitation)
shutdown()

However, since the SSL (and TLS) protocol has its own framing atop of TCP, the SSL sockets abstraction can, in certain respects, diverge from the specification of normal, OS-level sockets. See especially the notes on non-blocking sockets.

SSL sockets also have the following additional methods and attributes:

SSLSocket.do_handshake()¶: Perform the SSL setup handshake.

Changed in version 2.7.9: The handshake method also performs match_hostname() when the check_hostname attribute of the socket’s context is true.

SSLSocket.getpeercert(binary_form=False)¶

If there is no certificate for the peer on the other end of the connection, return None. If the SSL handshake hasn’t been done yet, raise ValueError.

If the binary_form parameter is False, and a certificate was received from the peer, this method returns a dict instance. If the certificate was not validated, the dict is empty. If the certificate was validated, it returns a dict with several keys, amongst them subject (the principal for which the certificate was issued) and issuer (the principal issuing the certificate). If a certificate contains an instance of the Subject Alternative Name extension (see RFC 3280), there will also be a subjectAltName key in the dictionary.

The subject and issuer fields are tuples containing the sequence of relative distinguished names (RDNs) given in the certificate’s data structure for the respective fields, and each RDN is a sequence of name-value pairs. Here is a real-world example:

{'issuer': ((('countryName', 'IL'),),
            (('organizationName', 'StartCom Ltd.'),),
            (('organizationalUnitName',
              'Secure Digital Certificate Signing'),),
            (('commonName',
              'StartCom Class 2 Primary Intermediate Server CA'),)),
 'notAfter': 'Nov 22 08:15:19 2013 GMT',
 'notBefore': 'Nov 21 03:09:52 2011 GMT',
 'serialNumber': '95F0',
 'subject': ((('description', '571208-SLe257oHY9fVQ07Z'),),
             (('countryName', 'US'),),
             (('stateOrProvinceName', 'California'),),
             (('localityName', 'San Francisco'),),
             (('organizationName', 'Electronic Frontier Foundation, Inc.'),),
             (('commonName', '*.eff.org'),),
             (('emailAddress', '[email protected]'),)),
 'subjectAltName': (('DNS', '*.eff.org'), ('DNS', 'eff.org')),
 'version': 3}

Note

To validate a certificate for a particular service, you can use the match_hostname() function.

If the binary_form parameter is True, and a certificate was provided, this method returns the DER-encoded form of the entire certificate as a sequence of bytes, or None if the peer did not provide a certificate. Whether the peer provides a certificate depends on the SSL socket’s role:

for a client SSL socket, the server will always provide a certificate, regardless of whether validation was required;
for a server SSL socket, the client will only provide a certificate when requested by the server; therefore getpeercert() will return None if you used CERT_NONE (rather than CERT_OPTIONAL or CERT_REQUIRED).

Changed in version 2.7.9: The returned dictionary includes additional items such as issuer and notBefore. Additionall ValueError is raised when the handshake isn’t done. The returned dictionary includes additional X509v3 extension items such as crlDistributionPoints, caIssuers and OCSP URIs.

SSLSocket.cipher()¶: Returns a three-value tuple containing the name of the cipher being used, the version of the SSL protocol that defines its use, and the number of secret bits being used. If no connection has been established, returns None.

SSLSocket.compression()¶

Return the compression algorithm being used as a string, or None if the connection isn’t compressed.

If the higher-level protocol supports its own compression mechanism, you can use OP_NO_COMPRESSION to disable SSL-level compression.

New in version 2.7.9.

SSLSocket.get_channel_binding(cb_type="tls-unique")¶

Get channel binding data for current connection, as a bytes object. Returns None if not connected or the handshake has not been completed.

The cb_type parameter allow selection of the desired channel binding type. Valid channel binding types are listed in the CHANNEL_BINDING_TYPES list. Currently only the ‘tls-unique’ channel binding, defined by RFC 5929, is supported. ValueError will be raised if an unsupported channel binding type is requested.

New in version 2.7.9.

SSLSocket.selected_alpn_protocol()¶: Return the protocol that was selected during the TLS handshake. If SSLContext.set_alpn_protocols() was not called, if the other party does not support ALPN, if this socket does not support any of the client’s proposed protocols, or if the handshake has not happened yet, None is returned.

New in version 2.7.10.

SSLSocket.selected_npn_protocol()¶: Return the higher-level protocol that was selected during the TLS/SSL handshake. If SSLContext.set_npn_protocols() was not called, or if the other party does not support NPN, or if the handshake has not yet happened, this will return None.

New in version 2.7.9.

SSLSocket.unwrap()¶: Performs the SSL shutdown handshake, which removes the TLS layer from the underlying socket, and returns the underlying socket object. This can be used to go from encrypted operation over a connection to unencrypted. The returned socket should always be used for further communication with the other side of the connection, rather than the original socket.

SSLSocket.version()¶: Return the actual SSL protocol version negotiated by the connection as a string, or None is no secure connection is established. As of this writing, possible return values include "SSLv2", "SSLv3", "TLSv1", "TLSv1.1" and "TLSv1.2". Recent OpenSSL versions may define more return values.

New in version 2.7.9.

SSLSocket.context¶: The SSLContext object this SSL socket is tied to. If the SSL socket was created using the top-level wrap_socket() function (rather than SSLContext.wrap_socket()), this is a custom context object created for this SSL socket.

New in version 2.7.9.

17.3.3. SSL Contexts¶

New in version 2.7.9.

An SSL context holds various data longer-lived than single SSL connections, such as SSL configuration options, certificate(s) and private key(s). It also manages a cache of SSL sessions for server-side sockets, in order to speed up repeated connections from the same clients.

class ssl.SSLContext(protocol)¶: Create a new SSL context. You must pass protocol which must be one of the PROTOCOL_* constants defined in this module. PROTOCOL_SSLv23 is currently recommended for maximum interoperability.

See also

create_default_context() lets the ssl module choose security settings for a given purpose.

Changed in version 2.7.16: The context is created with secure default values. The options OP_NO_COMPRESSION, OP_CIPHER_SERVER_PREFERENCE, OP_SINGLE_DH_USE, OP_SINGLE_ECDH_USE, OP_NO_SSLv2 (except for PROTOCOL_SSLv2), and OP_NO_SSLv3 (except for PROTOCOL_SSLv3) are set by default. The initial cipher suite list contains only HIGH ciphers, no NULL ciphers and no MD5 ciphers (except for PROTOCOL_SSLv2).

SSLContext objects have the following methods and attributes:

SSLContext.cert_store_stats()¶

Get statistics about quantities of loaded X.509 certificates, count of X.509 certificates flagged as CA certificates and certificate revocation lists as dictionary.

Example for a context with one CA cert and one other cert:

>>> context.cert_store_stats()
{'crl': 0, 'x509_ca': 1, 'x509': 2}

SSLContext.load_cert_chain(certfile, keyfile=None, password=None)¶

Load a private key and the corresponding certificate. The certfile string must be the path to a single file in PEM format containing the certificate as well as any number of CA certificates needed to establish the certificate’s authenticity. The keyfile string, if present, must point to a file containing the private key in. Otherwise the private key will be taken from certfile as well. See the discussion of Certificates for more information on how the certificate is stored in the certfile.

The password argument may be a function to call to get the password for decrypting the private key. It will only be called if the private key is encrypted and a password is necessary. It will be called with no arguments, and it should return a string, bytes, or bytearray. If the return value is a string it will be encoded as UTF-8 before using it to decrypt the key. Alternatively a string, bytes, or bytearray value may be supplied directly as the password argument. It will be ignored if the private key is not encrypted and no password is needed.

If the password argument is not specified and a password is required, OpenSSL’s built-in password prompting mechanism will be used to interactively prompt the user for a password.

An SSLError is raised if the private key doesn’t match with the certificate.

SSLContext.load_default_certs(purpose=Purpose.SERVER_AUTH)¶

Load a set of default “certification authority” (CA) certificates from default locations. On Windows it loads CA certs from the CA and ROOT system stores. On other systems it calls SSLContext.set_default_verify_paths(). In the future the method may load CA certificates from other locations, too.

The purpose flag specifies what kind of CA certificates are loaded. The default settings Purpose.SERVER_AUTH loads certificates, that are flagged and trusted for TLS web server authentication (client side sockets). Purpose.CLIENT_AUTH loads CA certificates for client certificate verification on the server side.

SSLContext.load_verify_locations(cafile=None, capath=None, cadata=None)¶

Load a set of “certification authority” (CA) certificates used to validate other peers’ certificates when verify_mode is other than CERT_NONE. At least one of cafile or capath must be specified.

This method can also load certification revocation lists (CRLs) in PEM or DER format. In order to make use of CRLs, SSLContext.verify_flags must be configured properly.

The cafile string, if present, is the path to a file of concatenated CA certificates in PEM format. See the discussion of Certificates for more information about how to arrange the certificates in this file.

The capath string, if present, is the path to a directory containing several CA certificates in PEM format, following an OpenSSL specific layout.

The cadata object, if present, is either an ASCII string of one or more PEM-encoded certificates or a bytes-like object of DER-encoded certificates. Like with capath extra lines around PEM-encoded certificates are ignored but at least one certificate must be present.

SSLContext.get_ca_certs(binary_form=False)¶: Get a list of loaded “certification authority” (CA) certificates. If the binary_form parameter is False each list entry is a dict like the output of SSLSocket.getpeercert(). Otherwise the method returns a list of DER-encoded certificates. The returned list does not contain certificates from capath unless a certificate was requested and loaded by a SSL connection.

Note

Certificates in a capath directory aren’t loaded unless they have been used at least once.

SSLContext.set_default_verify_paths()¶: Load a set of default “certification authority” (CA) certificates from a filesystem path defined when building the OpenSSL library. Unfortunately, there’s no easy way to know whether this method succeeds: no error is returned if no certificates are to be found. When the OpenSSL library is provided as part of the operating system, though, it is likely to be configured properly.

SSLContext.set_ciphers(ciphers)¶: Set the available ciphers for sockets created with this context. It should be a string in the OpenSSL cipher list format. If no cipher can be selected (because compile-time options or other configuration forbids use of all the specified ciphers), an SSLError will be raised.

Note

when connected, the SSLSocket.cipher() method of SSL sockets will give the currently selected cipher.

OpenSSL 1.1.1 has TLS 1.3 cipher suites enabled by default. The suites cannot be disabled with set_ciphers().

SSLContext.set_alpn_protocols(protocols)¶

Specify which protocols the socket should advertise during the SSL/TLS handshake. It should be a list of ASCII strings, like ['http/1.1', 'spdy/2'], ordered by preference. The selection of a protocol will happen during the handshake, and will play out according to RFC 7301. After a successful handshake, the SSLSocket.selected_alpn_protocol() method will return the agreed-upon protocol.

This method will raise NotImplementedError if HAS_ALPN is False.

OpenSSL 1.1.0 to 1.1.0e will abort the handshake and raise SSLError when both sides support ALPN but cannot agree on a protocol. 1.1.0f+ behaves like 1.0.2, SSLSocket.selected_alpn_protocol() returns None.

New in version 2.7.10.

SSLContext.set_npn_protocols(protocols)¶

Specify which protocols the socket should advertise during the SSL/TLS handshake. It should be a list of strings, like ['http/1.1', 'spdy/2'], ordered by preference. The selection of a protocol will happen during the handshake, and will play out according to the NPN draft specification. After a successful handshake, the SSLSocket.selected_npn_protocol() method will return the agreed-upon protocol.

This method will raise NotImplementedError if HAS_NPN is False.

SSLContext.set_servername_callback(server_name_callback)¶

Register a callback function that will be called after the TLS Client Hello handshake message has been received by the SSL/TLS server when the TLS client specifies a server name indication. The server name indication mechanism is specified in RFC 6066 section 3 - Server Name Indication.

Only one callback can be set per SSLContext. If server_name_callback is None then the callback is disabled. Calling this function a subsequent time will disable the previously registered callback.

The callback function, server_name_callback, will be called with three arguments; the first being the ssl.SSLSocket, the second is a string that represents the server name that the client is intending to communicate (or None if the TLS Client Hello does not contain a server name) and the third argument is the original SSLContext. The server name argument is the IDNA decoded server name.

A typical use of this callback is to change the ssl.SSLSocket’s SSLSocket.context attribute to a new object of type SSLContext representing a certificate chain that matches the server name.

Due to the early negotiation phase of the TLS connection, only limited methods and attributes are usable like SSLSocket.selected_alpn_protocol() and SSLSocket.context. SSLSocket.getpeercert(), SSLSocket.getpeercert(), SSLSocket.cipher() and SSLSocket.compress() methods require that the TLS connection has progressed beyond the TLS Client Hello and therefore will not contain return meaningful values nor can they be called safely.

The server_name_callback function must return None to allow the TLS negotiation to continue. If a TLS failure is required, a constant ALERT_DESCRIPTION_* can be returned. Other return values will result in a TLS fatal error with ALERT_DESCRIPTION_INTERNAL_ERROR.

If there is an IDNA decoding error on the server name, the TLS connection will terminate with an ALERT_DESCRIPTION_INTERNAL_ERROR fatal TLS alert message to the client.

If an exception is raised from the server_name_callback function the TLS connection will terminate with a fatal TLS alert message ALERT_DESCRIPTION_HANDSHAKE_FAILURE.

This method will raise NotImplementedError if the OpenSSL library had OPENSSL_NO_TLSEXT defined when it was built.

SSLContext.load_dh_params(dhfile)¶

Load the key generation parameters for Diffie-Helman (DH) key exchange. Using DH key exchange improves forward secrecy at the expense of computational resources (both on the server and on the client). The dhfile parameter should be the path to a file containing DH parameters in PEM format.

This setting doesn’t apply to client sockets. You can also use the OP_SINGLE_DH_USE option to further improve security.

SSLContext.set_ecdh_curve(curve_name)¶

Set the curve name for Elliptic Curve-based Diffie-Hellman (ECDH) key exchange. ECDH is significantly faster than regular DH while arguably as secure. The curve_name parameter should be a string describing a well-known elliptic curve, for example prime256v1 for a widely supported curve.

This setting doesn’t apply to client sockets. You can also use the OP_SINGLE_ECDH_USE option to further improve security.

This method is not available if HAS_ECDH is False.

17.3.4. Certificates¶

Certificates in general are part of a public-key / private-key system. In this system, each principal, (which may be a machine, or a person, or an organization) is assigned a unique two-part encryption key. One part of the key is public, and is called the public key; the other part is kept secret, and is called the private key. The two parts are related, in that if you encrypt a message with one of the parts, you can decrypt it with the other part, and only with the other part.

A certificate contains information about two principals. It contains the name of a subject, and the subject’s public key. It also contains a statement by a second principal, the issuer, that the subject is who they claim to be, and that this is indeed the subject’s public key. The issuer’s statement is signed with the issuer’s private key, which only the issuer knows. However, anyone can verify the issuer’s statement by finding the issuer’s public key, decrypting the statement with it, and comparing it to the other information in the certificate. The certificate also contains information about the time period over which it is valid. This is expressed as two fields, called “notBefore” and “notAfter”.

In the Python use of certificates, a client or server can use a certificate to prove who they are. The other side of a network connection can also be required to produce a certificate, and that certificate can be validated to the satisfaction of the client or server that requires such validation. The connection attempt can be set to raise an exception if the validation fails. Validation is done automatically, by the underlying OpenSSL framework; the application need not concern itself with its mechanics. But the application does usually need to provide sets of certificates to allow this process to take place.

Python uses files to contain certificates. They should be formatted as “PEM” (see RFC 1422), which is a base-64 encoded form wrapped with a header line and a footer line:

-----BEGIN CERTIFICATE-----
... (certificate in base64 PEM encoding) ...
-----END CERTIFICATE-----

17.3.4.1. Certificate chains¶

The Python files which contain certificates can contain a sequence of certificates, sometimes called a certificate chain. This chain should start with the specific certificate for the principal who “is” the client or server, and then the certificate for the issuer of that certificate, and then the certificate for the issuer of that certificate, and so on up the chain till you get to a certificate which is self-signed, that is, a certificate which has the same subject and issuer, sometimes called a root certificate. The certificates should just be concatenated together in the certificate file. For example, suppose we had a three certificate chain, from our server certificate to the certificate of the certification authority that signed our server certificate, to the root certificate of the agency which issued the certification authority’s certificate:

-----BEGIN CERTIFICATE-----
... (certificate for your server)...
-----END CERTIFICATE-----
-----BEGIN CERTIFICATE-----
... (the certificate for the CA)...
-----END CERTIFICATE-----
-----BEGIN CERTIFICATE-----
... (the root certificate for the CA's issuer)...
-----END CERTIFICATE-----

17.3.4.2. CA certificates¶

If you are going to require validation of the other side of the connection’s certificate, you need to provide a “CA certs” file, filled with the certificate chains for each issuer you are willing to trust. Again, this file just contains these chains concatenated together. For validation, Python will use the first chain it finds in the file which matches. The platform’s certificates file can be used by calling SSLContext.load_default_certs(), this is done automatically with create_default_context().

17.3.4.3. Combined key and certificate¶

Often the private key is stored in the same file as the certificate; in this case, only the certfile parameter to SSLContext.load_cert_chain() and wrap_socket() needs to be passed. If the private key is stored with the certificate, it should come before the first certificate in the certificate chain:

-----BEGIN RSA PRIVATE KEY-----
... (private key in base64 encoding) ...
-----END RSA PRIVATE KEY-----
-----BEGIN CERTIFICATE-----
... (certificate in base64 PEM encoding) ...
-----END CERTIFICATE-----

17.3.4.4. Self-signed certificates¶

If you are going to create a server that provides SSL-encrypted connection services, you will need to acquire a certificate for that service. There are many ways of acquiring appropriate certificates, such as buying one from a certification authority. Another common practice is to generate a self-signed certificate. The simplest way to do this is with the OpenSSL package, using something like the following:

% openssl req -new -x509 -days 365 -nodes -out cert.pem -keyout cert.pem
Generating a 1024 bit RSA private key
.......++++++
.............................++++++
writing new private key to 'cert.pem'
-----
You are about to be asked to enter information that will be incorporated
into your certificate request.
What you are about to enter is what is called a Distinguished Name or a DN.
There are quite a few fields but you can leave some blank
For some fields there will be a default value,
If you enter '.', the field will be left blank.
-----
Country Name (2 letter code) [AU]:US
State or Province Name (full name) [Some-State]:MyState
Locality Name (eg, city) []:Some City
Organization Name (eg, company) [Internet Widgits Pty Ltd]:My Organization, Inc.
Organizational Unit Name (eg, section) []:My Group
Common Name (eg, YOUR name) []:myserver.mygroup.myorganization.com
Email Address []:ops@myserver.mygroup.myorganization.com
%

The disadvantage of a self-signed certificate is that it is its own root certificate, and no one else will have it in their cache of known (and trusted) root certificates.

17.3.5. Examples¶

17.3.5.1. Testing for SSL support¶

To test for the presence of SSL support in a Python installation, user code should use the following idiom:

try:
    import ssl
except ImportError:
    pass
else:
    ...  # do something that requires SSL support

17.3.5.2. Client-side operation¶

This example creates a SSL context with the recommended security settings for client sockets, including automatic certificate verification:

>>> context = ssl.create_default_context()

If you prefer to tune security settings yourself, you might create a context from scratch (but beware that you might not get the settings right):

>>> context = ssl.SSLContext(ssl.PROTOCOL_TLS)
>>> context.verify_mode = ssl.CERT_REQUIRED
>>> context.check_hostname = True
>>> context.load_verify_locations("/etc/ssl/certs/ca-bundle.crt")

(this snippet assumes your operating system places a bundle of all CA certificates in /etc/ssl/certs/ca-bundle.crt; if not, you’ll get an error and have to adjust the location)

When you use the context to connect to a server, CERT_REQUIRED validates the server certificate: it ensures that the server certificate was signed with one of the CA certificates, and checks the signature for correctness:

>>> conn = context.wrap_socket(socket.socket(socket.AF_INET),
...                            server_hostname="www.python.org")
>>> conn.connect(("www.python.org", 443))

You may then fetch the certificate:

>>> cert = conn.getpeercert()

Visual inspection shows that the certificate does identify the desired service (that is, the HTTPS host www.python.org):

>>> pprint.pprint(cert)
{'OCSP': ('http://ocsp.digicert.com',),
 'caIssuers': ('http://cacerts.digicert.com/DigiCertSHA2ExtendedValidationServerCA.crt',),
 'crlDistributionPoints': ('http://crl3.digicert.com/sha2-ev-server-g1.crl',
                           'http://crl4.digicert.com/sha2-ev-server-g1.crl'),
 'issuer': ((('countryName', 'US'),),
            (('organizationName', 'DigiCert Inc'),),
            (('organizationalUnitName', 'www.digicert.com'),),
            (('commonName', 'DigiCert SHA2 Extended Validation Server CA'),)),
 'notAfter': 'Sep  9 12:00:00 2016 GMT',
 'notBefore': 'Sep  5 00:00:00 2014 GMT',
 'serialNumber': '01BB6F00122B177F36CAB49CEA8B6B26',
 'subject': ((('businessCategory', 'Private Organization'),),
             (('1.3.6.1.4.1.311.60.2.1.3', 'US'),),
             (('1.3.6.1.4.1.311.60.2.1.2', 'Delaware'),),
             (('serialNumber', '3359300'),),
             (('streetAddress', '16 Allen Rd'),),
             (('postalCode', '03894-4801'),),
             (('countryName', 'US'),),
             (('stateOrProvinceName', 'NH'),),
             (('localityName', 'Wolfeboro,'),),
             (('organizationName', 'Python Software Foundation'),),
             (('commonName', 'www.python.org'),)),
 'subjectAltName': (('DNS', 'www.python.org'),
                    ('DNS', 'python.org'),
                    ('DNS', 'pypi.org'),
                    ('DNS', 'docs.python.org'),
                    ('DNS', 'testpypi.python.org'),
                    ('DNS', 'bugs.python.org'),
                    ('DNS', 'wiki.python.org'),
                    ('DNS', 'hg.python.org'),
                    ('DNS', 'mail.python.org'),
                    ('DNS', 'packaging.python.org'),
                    ('DNS', 'pythonhosted.org'),
                    ('DNS', 'www.pythonhosted.org'),
                    ('DNS', 'test.pythonhosted.org'),
                    ('DNS', 'us.pycon.org'),
                    ('DNS', 'id.python.org')),
 'version': 3}

Now the SSL channel is established and the certificate verified, you can proceed to talk with the server:

>>> conn.sendall(b"HEAD / HTTP/1.0\r\nHost: linuxfr.org\r\n\r\n")
>>> pprint.pprint(conn.recv(1024).split(b"\r\n"))
[b'HTTP/1.1 200 OK',
 b'Date: Sat, 18 Oct 2014 18:27:20 GMT',
 b'Server: nginx',
 b'Content-Type: text/html; charset=utf-8',
 b'X-Frame-Options: SAMEORIGIN',
 b'Content-Length: 45679',
 b'Accept-Ranges: bytes',
 b'Via: 1.1 varnish',
 b'Age: 2188',
 b'X-Served-By: cache-lcy1134-LCY',
 b'X-Cache: HIT',
 b'X-Cache-Hits: 11',
 b'Vary: Cookie',
 b'Strict-Transport-Security: max-age=63072000; includeSubDomains',
 b'Connection: close',
 b'',
 b'']

See the discussion of Security considerations below.

17.3.5.3. Server-side operation¶

For server operation, typically you’ll need to have a server certificate, and private key, each in a file. You’ll first create a context holding the key and the certificate, so that clients can check your authenticity. Then you’ll open a socket, bind it to a port, call listen() on it, and start waiting for clients to connect:

import socket, ssl

context = ssl.create_default_context(ssl.Purpose.CLIENT_AUTH)
context.load_cert_chain(certfile="mycertfile", keyfile="mykeyfile")

bindsocket = socket.socket()
bindsocket.bind(('myaddr.mydomain.com', 10023))
bindsocket.listen(5)

When a client connects, you’ll call accept() on the socket to get the new socket from the other end, and use the context’s SSLContext.wrap_socket() method to create a server-side SSL socket for the connection:

while True:
    newsocket, fromaddr = bindsocket.accept()
    connstream = context.wrap_socket(newsocket, server_side=True)
    try:
        deal_with_client(connstream)
    finally:
        connstream.shutdown(socket.SHUT_RDWR)
        connstream.close()

Then you’ll read data from the connstream and do something with it till you are finished with the client (or the client is finished with you):

def deal_with_client(connstream):
    data = connstream.read()
    # null data means the client is finished with us
    while data:
        if not do_something(connstream, data):
            # we'll assume do_something returns False
            # when we're finished with client
            break
        data = connstream.read()
    # finished with client

And go back to listening for new client connections (of course, a real server would probably handle each client connection in a separate thread, or put the sockets in non-blocking mode and use an event loop).

17.3.6. Notes on non-blocking sockets¶

When working with non-blocking sockets, there are several things you need to be aware of:

Calling select() tells you that the OS-level socket can be read from (or written to), but it does not imply that there is sufficient data at the upper SSL layer. For example, only part of an SSL frame might have arrived. Therefore, you must be ready to handle SSLSocket.recv() and SSLSocket.send() failures, and retry after another call to select().
Conversely, since the SSL layer has its own framing, a SSL socket may still have data available for reading without select() being aware of it. Therefore, you should first call SSLSocket.recv() to drain any potentially available data, and then only block on a select() call if still necessary.

(of course, similar provisions apply when using other primitives such as poll(), or those in the selectors module)

The SSL handshake itself will be non-blocking: the SSLSocket.do_handshake() method has to be retried until it returns successfully. Here is a synopsis using select() to wait for the socket’s readiness:

while True:
    try:
        sock.do_handshake()
        break
    except ssl.SSLWantReadError:
        select.select([sock], [], [])
    except ssl.SSLWantWriteError:
        select.select([], [sock], [])

17.3.7. Security considerations¶

17.3.7.1. Best defaults¶

For client use, if you don’t have any special requirements for your security policy, it is highly recommended that you use the create_default_context() function to create your SSL context. It will load the system’s trusted CA certificates, enable certificate validation and hostname checking, and try to choose reasonably secure protocol and cipher settings.

If a client certificate is needed for the connection, it can be added with SSLContext.load_cert_chain().

By contrast, if you create the SSL context by calling the SSLContext constructor yourself, it will not have certificate validation nor hostname checking enabled by default. If you do so, please read the paragraphs below to achieve a good security level.

17.3.7.2. Manual settings¶

17.3.7.2.1. Verifying certificates¶

When calling the SSLContext constructor directly, CERT_NONE is the default. Since it does not authenticate the other peer, it can be insecure, especially in client mode where most of time you would like to ensure the authenticity of the server you’re talking to. Therefore, when in client mode, it is highly recommended to use CERT_REQUIRED. However, it is in itself not sufficient; you also have to check that the server certificate, which can be obtained by calling SSLSocket.getpeercert(), matches the desired service. For many protocols and applications, the service can be identified by the hostname; in this case, the match_hostname() function can be used. This common check is automatically performed when SSLContext.check_hostname is enabled.

In server mode, if you want to authenticate your clients using the SSL layer (rather than using a higher-level authentication mechanism), you’ll also have to specify CERT_REQUIRED and similarly check the client certificate.

Note

In client mode, CERT_OPTIONAL and CERT_REQUIRED are equivalent unless anonymous ciphers are enabled (they are disabled by default).

17.3.7.2.2. Protocol versions¶

SSL versions 2 and 3 are considered insecure and are therefore dangerous to use. If you want maximum compatibility between clients and servers, it is recommended to use PROTOCOL_SSLv23 as the protocol version and then disable SSLv2 and SSLv3 explicitly using the SSLContext.options attribute:

context = ssl.SSLContext(ssl.PROTOCOL_SSLv23)
context.options |= ssl.OP_NO_SSLv2
context.options |= ssl.OP_NO_SSLv3

The SSL context created above will only allow TLSv1 and later (if supported by your system) connections.

17.3.7.2.3. Cipher selection¶

If you have advanced security requirements, fine-tuning of the ciphers enabled when negotiating a SSL session is possible through the SSLContext.set_ciphers() method. Starting from Python 2.7.9, the ssl module disables certain weak ciphers by default, but you may want to further restrict the cipher choice. Be sure to read OpenSSL’s documentation about the cipher list format. If you want to check which ciphers are enabled by a given cipher list, use the openssl ciphers command on your system.

17.3.7.3. Multi-processing¶

If using this module as part of a multi-processed application (using, for example the multiprocessing or concurrent.futures modules), be aware that OpenSSL’s internal random number generator does not properly handle forked processes. Applications must change the PRNG state of the parent process if they use any SSL feature with os.fork(). Any successful call of RAND_add(), RAND_bytes() or RAND_pseudo_bytes() is sufficient.

17.3.8. LibreSSL support¶

LibreSSL is a fork of OpenSSL 1.0.1. The ssl module has limited support for LibreSSL. Some features are not available when the ssl module is compiled with LibreSSL.

LibreSSL >= 2.6.1 no longer supports NPN. The methods SSLContext.set_npn_protocols() and SSLSocket.selected_npn_protocol() are not available.
SSLContext.set_default_verify_paths() ignores the env vars SSL_CERT_FILE and SSL_CERT_PATH although get_default_verify_paths() still reports them.

17.3. `ssl` — TLS/SSL wrapper for socket objects¶

17.3.1. Functions, Constants, and Exceptions¶

17.3.1.1. Socket creation¶

17.3.1.2. Context creation¶

17.3.1.3. Random generation¶

17.3.1.4. Certificate handling¶

17.3.1.5. Constants¶

17.3.2. SSL Sockets¶

17.3.3. SSL Contexts¶

17.3.4. Certificates¶

17.3.4.1. Certificate chains¶

17.3.4.2. CA certificates¶

17.3.4.3. Combined key and certificate¶

17.3.4.4. Self-signed certificates¶

17.3.5. Examples¶

17.3.5.1. Testing for SSL support¶

17.3.5.2. Client-side operation¶

17.3.5.3. Server-side operation¶

17.3.6. Notes on non-blocking sockets¶

17.3.7. Security considerations¶

17.3.7.1. Best defaults¶

17.3.7.2. Manual settings¶

17.3.7.2.1. Verifying certificates¶

17.3.7.2.2. Protocol versions¶

17.3.7.2.3. Cipher selection¶

17.3.7.3. Multi-processing¶

17.3.8. LibreSSL support¶

Table Of Contents

Previous topic

Next topic

This Page

client / server	SSLv2	SSLv3	SSLv23	TLSv1	TLSv1.1	TLSv1.2
SSLv2	yes	no	yes	no	no	no
SSLv3	no	yes	yes	no	no	no
SSLv23 [1]	no	yes	yes	yes	yes	yes
TLSv1	no	no	yes	yes	no	no
TLSv1.1	no	no	yes	no	yes	no
TLSv1.2	no	no	yes	no	no	yes

17.3. ssl — TLS/SSL wrapper for socket objects¶

17.3.1. Functions, Constants, and Exceptions¶

17.3.1.1. Socket creation¶

17.3.1.2. Context creation¶

17.3.1.3. Random generation¶

17.3.1.4. Certificate handling¶

17.3.1.5. Constants¶

17.3.2. SSL Sockets¶

17.3.3. SSL Contexts¶

17.3.4. Certificates¶

17.3.4.1. Certificate chains¶

17.3.4.2. CA certificates¶

17.3.4.3. Combined key and certificate¶

17.3.4.4. Self-signed certificates¶

17.3.5. Examples¶

17.3.5.1. Testing for SSL support¶

17.3.5.2. Client-side operation¶

17.3.5.3. Server-side operation¶

17.3.6. Notes on non-blocking sockets¶

17.3.7. Security considerations¶

17.3.7.1. Best defaults¶

17.3.7.2. Manual settings¶

17.3.7.2.1. Verifying certificates¶

17.3.7.2.2. Protocol versions¶

17.3.7.2.3. Cipher selection¶

17.3.7.3. Multi-processing¶

17.3.8. LibreSSL support¶

17.3. `ssl` — TLS/SSL wrapper for socket objects¶