Release notes
*************

This file describes changes in recent versions of Modules. It
primarily documents those changes that are of interest to users and
admins.


Modules 4.5.2 (2020-07-30)
==========================

* Init: "list" and "source" sub-commands do not take available
  modules as argument in fish completion script.

* Init: fix option list for "search" sub-command in bash completion
  script.

* Fix double error counter increase when modulefile evaluation
  breaks.

* Install: adapt "configure" script to pass to the "configure"
  script of Modules compatibility version only a subset of the options
  it supports (most commonly used options).

* Install: raise an error when an unknown option is passed to
  "configure" script rather silently ignore it. (fix issue #348)

* Install: enable the definition of installation directory options
  of "configure" script with the "--option value" syntax in addition
  to the "--option=value" syntax. (fix issue #348)

* Doc: alphabetically sort sub-commands of "module-info" modulefile
  Tcl command in modulefile document.

* Script: clean previously built environment-modules RPMs in
  **mrel**.

* Clearly separate quarantine variable definition from tclsh binary
  on "modulecmd.tcl" evaluated command call in "_module_raw" function
  for *sh*, *bash*, *ksh* and *zsh* shells. (fix issue #350)

* Doc: clarify in documentation index that Environment Modules
  should not be confused with language-specific modules. (contribution
  from Rob Hurt)

* Adapt conflict detection tests to ensure a module loaded by its
  full pathname will not detect itself as a conflict when declaring a
  reflexive conflict. (fix issue #352)

* Adapt the **mrel** and **mpub** commands to produce new Modules
  release from a *vZ.Y.x* git branch rather than from the repository
  main branch.


Modules 4.5.1 (2020-06-01)
==========================

* Install: consistently output Makefile warning messages on stderr.

* Script: add the "mrel" script, that automates build of the Modules
  release files and performs tests over these distribution files to
  guaranty their correctness.

* Script: add the "mpub" script, that automates Modules new release
  publishing over git repositories and websites.

* Install: remove project-specific tools from git repository export
  thus from release distribution files.

* Disable pager when "clear" sub-command is called from "ml"
  shortcut command. (fix issue #338)

* In case a modulefile evaluation fails, environment context prior
  this failed evaluation is restored. Fix environment variable
  restoration mechanism to keep the link that monitors and updates
  environment variable array "env" in every Tcl sub-interpreters. (fix
  issue #340)

* Ensure environment variable change at the Tcl interpreter level is
  propagated to every sub-interpreters used to evaluate modulefiles or
  modulercs. (fix issue #342)

* Use absolute path to load Modules Tcl extension library. (fix
  issue #344 with contribution from Roy Storey)

* Fix formatting of error stack trace not to look for internal
  commands to withdraw if start-up stack pattern cannot be matched.


Modules 4.5.0 (2020-04-07)
==========================

* Doc: fix typos and grammar mistakes on module, modulefile and
  Differences between versions 3.2 and 4 documents. (contribution from
  Colin Marquardt)

* Doc: update cookbook recipes to highlight code of the Tcl scripts
  included. (contribution from Colin Marquardt)

* Doc: improve markup of module, modulefile and Differences between
  versions 3.2 and 4 documents to enable references to module sub-
  commands, command line switches, environment variables and
  modulefile Tcl commands. (contribution from Colin Marquardt)

* Doc: alphabetically sort module sub-commands, command-line
  switches, environment variables and modulefile Tcl commands in
  module and modulefile documents.

* Introduce the "ml" command, a handy frontend to the "module"
  command. "ml" reduces the number of characters to type to trigger
  "module". With no argument "ml" is equivalent to "module list", "ml
  mod" corresponds to "module load mod" and "ml -mod" means "module
  unload mod". Multiple modules to either load or unload can be
  combined on a single command. "ml" accepts all command-line switches
  and sub-commands accepted by "module" command. "ml" command is
  defined by default. Its definition can be controlled at
  "./configure" time with "--enable-ml" option or later on with "ml"
  configuration option (which defines "MODULES_ML" environment
  variable when set).

* Fix module sub-command abbreviation match to ensure passed
  abbreviated form fully match sub-command, not only its minimal
  abbreviated form. As an example, "lod" or "loda" do not match
  anymore the "load" sub-command, "lo" or "loa" still do.

* Add the "-j"/"--json" command line switches to the "avail",
  "list", "savelist", "whatis" and "search" module sub-commands to
  render their output in JSON format. (fix issue #303)

* Script: remove need to build project management-specific tools
  ("mtreview", "mb", "mlprof" and "playdemo") prior using them.

* Script: gather all distributed and maintained scripts in a
  "script" directory at the root of the project repository tree.

* Install: provide Windows-specific batch files when "./configure"
  option "--enable-windows-support" is set. module command wrapper
  "module.cmd" is installed in "bindir" and initialization script
  "cmd.cmd" in "initdir". Those batch files are relocatable and expect
  "modulecmd.tcl" in "..\libexec" directory. (fix issue #272 with
  contribution from Jacques Raphanel)

* Install: add ml command wrapper "ml.cmd" and install it in
  "bindir" when "./configure" option "--enable-windows-support" is
  set.

* Install: introduce envml command wrapper "envml.cmd" for Windows
  "cmd" shell and install it in "bindir" when "./configure" option "--
  enable-windows-support" is set. (contribution from Jacques Raphanel)

* Doc: improve documentation portal index.

* Install: add "dist-win" target to Makefile in order to build a
  distribution zipball containing the required files to run Modules on
  a Windows platform. "INSTALL.bat" and "UNINSTALL.bat" Windows batch
  files are introduced and shipped in the zipball to automate
  installation and basic configuration of Modules on the Windows
  platform.

* Doc: update Installing Modules on Windows document to describe how
  to install Modules with newly provided Windows-specific distribution
  zipball.

* Install: enable build of Modules from "git archive" tarball or
  zipball exports (like download source archives automatically
  provided on GitHub project)

* Install: ship reStructuredText and MarkDown source documents at
  the root of Modules distribution tarball rather their built txt
  counterpart.

* Script: fix "createmodule.sh" script to correctly analyses
  environment when shell functions are found defined in it.

* Script: inhibit output generated by scripts evaluated by
  "createmodule.sh" and "createmodule.py" to ensure these outputs will
  not get in the way when analyzing the environment changes. (fix
  issue #309)

* Correctly handle symbolic version target including a whitespace in
  their name.

* Testsuite: output test error details whatever the testsuite run
  verbose mode.

* Install: adapt configure script and Makefile to detect "python"
  command location and set it as shebang for "createmodule.py" and
  "gitlog2changelog.py". If "python" command is not found, "python3"
  then "python2" are searched.

* Install: enable to pass a specific Python interpreter command name
  or location at configure step with "--with-python" option. Specified
  command name or location should be found on build system only if
  building from git repository.

* Install: build "createmodule.py" script and install it in
  "bindir".

* Install: update RPM spec file to explicitly define Python
  interpreter location.

* Script: fix "createmodule.py" script for Python3 (fix issue #315
  with contribution from Armin Wehrfritz)

* Lift Perl variable strictness when defining "_mlstatus" variable
  in case "modulecmd.tcl" output is directly evaluated without use of
  the "module" sub-routine in Perl script. (with contribution from
  Andrey Maslennikov)

* Script: fix path de-duplication in "createmodule.sh". (fix issue
  #316)

* Doc: add *Handling Compiler and other Package Dependencies*
  cookbook recipe, which discusses various strategies for creating
  modulefiles for packages with multiple builds depending on
  previously loaded compiler, MPI libraries, etc. (contribution from
  Tom Payerle)

* Init: test availability of "compopt" Bash builtin prior using it
  in Bash completion script to avoid error with versions of this shell
  older than 4.0. (fix issue #318)

* Install: adapt configure step to detect if "sed" option "-E" is
  supported and fallback to "-r" otherwise in shell completion
  scripts. (fix issue #317)

* Add support for the "NO_COLOR" environment variable (https://no-
  color.org/) which when set (regardless of its value) prevents the
  addition of ANSI color. When set, "NO_COLOR" prevails over
  "CLICOLOR" and "CLICOLOR_FORCE" environment variables.
  "MODULES_COLOR" overrides these three variables. (fix issue #310)

* Script: when analyzing environment variable changes in
  "createmodule.sh" applied by shell script passed as argument,
  produce a "setenv" modulefile statement for any variable found set
  prior script evaluation and for which value is completely changed
  after script evaluation. (fix issue #320)

* When an error message is composed of multiple lines, render it in
  the same way whether it is part of a block message or not: lines
  after the first one are prepended with a 2-space padding. As a
  result error messages appear clearly separated from each other.

* Append to the error message the error stack trace when a general
  unknown error occurs in "modulecmd.tcl" and provide a link to
  encourage users to report such error to the GitHub project.

* Add to the error message the error stack trace for errors
  occurring during site-specific configuration evaluation. Error stack
  is expunged from the "modulecmd.tcl" internals to only report
  information relevant to site-specific configuration file.

* When an error occurs during the evaluation of a modulefile or a
  modulerc, report associated error stack trace expunged from
  "modulecmd.tcl" internal references to only output useful
  information for users.

* GitHub: add issue templates to guide people submitting a bug
  report or a feature request.

* Doc: provide a link toward issues that have been fixed between
  versions 3.2 and 4.0 in Differences between versions 3.2 and 4
  document.

* Script: introduce "envml.cmd" script for Windows platform
  providing similar behavior than "envml" Bash script. (contribution
  from Jacques Raphanel)

* Init: add Bash shell completion for the "ml" command.
  (contribution from Adrien Cotte)

* Fix Fish shell stderr redirection for newer Fish versions. (fix
  issue #325)

* Correctly handle modulefiles and modulepaths containing a space
  character in their name whether they are used from the command-line,
  in collections, within modulefiles or from loaded environment
  definitions.

* Doc: add *Default and latest version specifiers* design note.

* An "avail" search over a symbolic version targeting a directory
  now correctly returns the special modules (alias and virtual module)
  lying in this directory. (fix issue #327)

* "whatis" and "paths" searches only return special modules
  (symbolic version, alias and virtual modules) that fully match
  search query, not those that partially match it. (fix issue #328)

* alias and virtual module whose name mention a directory that does
  not exists are correctly handled. (fix issue #168)

* Hide special modules (aliases, symbolic versions and virtual
  modules) whose version name starts with a dot character (".") from
  "avail", "whatis" and "paths" searches if their query does not fully
  match special module name. (fix issue #329)

* Filter-out from the output of the "aliases" sub-command all hidden
  aliases, symbolic versions or hidden modules targeted by a non-
  hidden symbolic version. (fix issue #330)

* Enable resolution of default module in module sub-directory when
  this default symbol targets a hidden directory (whose name starts
  with a dot character). (fix issue #331)

* Doc: clarify hidden module location in modulefile man page.

* Install: define "LD_PRELOAD" as quarantine var along with
  "LD_LIBRARY_PATH" in RPM specfile.

* When "implicit_default" and "advanced_version_spec" configuration
  are enabled, automatically define a "default" and "latest" symbolic
  version for each module name (at each module depth for deep modules)
  if those version names does not already exist. (fix issue #210)

* Once a module is loaded, the automatically defined symbols
  associated to it are recorded in loaded environment in the
  "MODULES_LMALTNAME" environment variable. They are distinguished
  from the other alternative names applying to the module by a "as|"
  prefix, which qualifies their *auto symbol* type.

* When an advanced version specifier list contains symbolic version
  references, fix resolving to honor default version if part of the
  specified list. (fix issue #334)


Modules 4.4.1 (2020-01-03)
==========================

* Fix error and warning messages relative to dependency management
  to enclose dependency specification in single quotes to clearly
  distinguish specification from each other.

* Skip output of module loading message if module is already loaded.

* Doc: add demonstration material played at SC19 to promote the new
  features of Modules.

* Contrib: add "playdemo" script to play recorded demonstration
  cast.

* Doc: add a web anchor to each modulefile Tcl command, module sub-
  command and module environment variable documentation.

* Install: update RPM spec file to enable build on "el8".

* Doc: fix RST syntax for bullet lists in design docs. (fix issue
  #306)

* In case "module avail" query does not match a directory but only
  its contained elements (for instance "module av mod/7" matches
  "mod/7.1" and "mod/7.2" but not "mod/"), fix query processing to
  correctly return latest or default element in case "--latest" or "--
  default" flags are set.

* In case a "module avail" query performed in a no-indepth mode with
  " --latest" or "--default" flags either enabled or disabled, fix
  query processing to return directory elements if they are part of
  result.

* When a "module avail" query performed in no-indepth mode targets a
  virtual module, fix result to filter-out the directory holding the
  virtual module from result.

* Fix "module avail --default" queries when modulefile default
  version does not match query: select latest version from modulefiles
  matching query unless "implicit_default" configuration is disabled
  in which case no default version is returned.

* Improve highlighting of module "avail" and "whatis" search result
  by coloring module names matching search query expressed with the
  advanced version specifiers. "name@1,3" or "name@1:3" queries now
  highlight "name/1" and "name/3" strings found in search result.

* Contrib: add the "mlprof" script which wraps "modulecmd.tcl" to
  collect profiling information on its execution.

* Contrib: adapt "mb" script to profile "modulecmd.tcl" run tests
  rather bench them when "profile" argument is passed to the script.

* Improve overall performances of module names and versions
  comparison by introducing optimized procedures and caching in memory
  module search results.


Modules 4.4.0 (2019-11-17)
==========================

* Doc: add *Return file basename on module-info name for full path
  modulefile* recipe to cookbook. (fix issue #297)

* Rework internal handling of configuration options to gather all
  option definitions in a global array and use the same initialization
  and retrieval procedure, named "getConf", for all these options.

* Add the "setConf", "unsetConf" and "lappendConf" procedures to
  provide unified ways to set the value of configuration option. These
  procedures should be used in site configuration files to override
  configuration option value instead of directly setting corresponding
  option variable as it was done in previous Modules releases.

* Add the ability to match module specification in a case
  insensitive manner. Default case sensitiveness behavior is set at
  "./configure" time with the "--with-icase" option. It could be
  superseded with the "MODULES_ICASE" environment variable, that could
  be set with "config" module sub-command through the "icase" option.
  Command-line switch "--icase" ("-i") enables to supersede defined
  case sensitiveness configuration. (fix issue #212 with contribution
  from Eric Deveaud)

* Introduce the extended default mechanism, to help selecting a
  module when only the first numbers in its version are specified.
  Starting portion of the version, part separated from the rest of the
  version string by a "." character, will get matched to the
  appropriate complete version name. In case multiple versions match
  partial version specified and only one module should be returned,
  default version (implicit or explicit) among matches is returned. In
  case "implicit_default" option is disabled and no explicit default
  is found among matches, an error is returned. This mechanism is
  enabled through a new configuration option named "extended_default"
  (which defines "MODULES_EXTENDED_DEFAULT" environment variable when
  set). It may be enabled by default in "modulecmd.tcl" script with
  option " --enable-extended-default" passed to the "./configure"
  script.

* Introduce the advanced module version specifiers mechanism to
  specify finer constraints on module version. This new feature
  enables to filter the module selection to a given version list or
  range by specifying after the module name a version constraint
  prefixed by the "@" character. It leverages the version specifier
  syntax of the Spack package manager. A single version can be
  specified with the "@version" syntax, a list of versions with
  "@version1,version2,...", a greater than or equal to range with
  "@version1:" syntax, a less than or equal to range with "@:version2"
  and an in between or equal to range with "@version1:version2"
  syntax. In case "implicit_default" option is disabled and no
  explicit default is found among version specifier matches, an error
  is returned. This mechanism is enabled through a new configuration
  option named "advanced_version_spec" (which  defines
  "MODULES_ADVANCED_VERSION_SPEC" environment variable when set). It
  may be enabled by default in "modulecmd.tcl" script with option "--
  enable-advanced-version-spec" passed to the "./configure" script.

* Conflict defined with a generic module name or an advanced version
  specifier may match multiple loaded modules (generally in case
  multiple loaded modules share same root name). Loaded environment
  analysis has been fixed to bind conflict to all loaded modules
  matching it. As a result the *Dependent Reload* mechanism is not
  triggered when one loaded module matching conflict is removed if
  another loaded module still match the conflict.

* Doc: add *Module selection contexts*, *Insensitive case*,
  *Extended default* and *Advanced module version specifiers* design
  notes.

* Make "MODULESHOME" environment variable controllable through the
  "config" sub-command with "home" configuration option. A "--with-
  moduleshome" argument is also added to the ./configure script to set
  specific default value for this option at installation time. (fix
  issue #292)


Modules 4.3.1 (2019-09-21)
==========================

* Contrib: add "mb" script to bench Modules versions.

* Correct "modulecmd.tcl" script startup to correctly report error
  in case Tcl extension library fails to load. (fix issue #284)

* Install: fix typo on "CFLAGS" definition in "lib/Makefile". (fix
  issue #287 with contribution from Felix Neumärker)

* Remove useless code in Modules Tcl extension library

* Make URLs in README correctly rendered in HTML. (contribution from
  Per Persson)

* Doc: clarify modulefile evaluation modes in modulefile.4 man page.
  (fix issue #289)

* When looking at the closest match among loaded modules when
  switching module with just a single module argument specified, load
  the information on the currently set environment to get the
  alternative names of loaded modules prior to look at closest module
  match. (fix issue #290)

* Doc: describe the way to determine the site-specific configuration
  script location in cookbook recipes implying the installation of
  such a file. (fix issue #266)

* Doc: add *Log module command* recipe to cookbook. (fix issue #283)

* Doc: add *Expose procedures and variables to modulefiles* recipe
  to cookbook.

* Doc: add *Make defined modulepaths persist over sudo* recipe to
  cookbook.

* Doc: add *Ensure user fully qualify the modules they use* recipe
  to cookbook.

* Introduce the "wa_277" configuration option to workaround an issue
  with Tcsh history mechanism. Default "module" alias definition for
  Tcsh hits an issue with shell history mechanism: erroneous history
  entries are recorded each time the "module" command is called. When
  "wa_277" option is enabled (which sets the "MODULES_WA_277"
  environment variable to *1*), an alternative module alias is defined
  which fixes the history mechanism issue. However the alternative
  definition of the module alias weakens shell evaluation of the code
  produced by modulefiles. Characters with special meaning for Tcsh
  shell (like *{* and *}*) may not be used anymore in shell alias
  definition elsewhere the evaluation of the code produced by
  modulefiles will return a syntax error. (fix issue #277)

* Doc: add *Tips for Code Reuse in Modulefiles* recipe to cookbook.
  (contribution from Tom Payerle)

* Fix the "whatis" and "paths" sub-command results for module
  symbolic versions targeting a directory when "implicit_default"
  configuration option is disabled. No error is returned and same
  result is now obtained whether the symbolic name or its target is
  used as argument for those two sub-commands. (fix issue #294)

* Fix the "whatis" and "paths" sub-command results for module
  aliases targeting a directory when "implicit_default" configuration
  option is disabled. No error is returned and same result is now
  obtained whether the alias name or its target is used as argument
  for those two sub-commands. (fix issue #295)

* Rework all the ternary operator expressions in "modulecmd.tcl"
  that may result in a *nan* value (whatever the case used to write
  this string) as the "expr" Tcl command raises an error when it
  returns such a value, which breaks Modules as soon as a modulefile,
  an alias or a symbolic version is named *nan*. (fix issue #296)


Modules 4.3.0 (2019-07-26)
==========================

* Introduce Vim addon files to highlight the modulefile syntax.
  Installation of these files, which is enabled by default, is
  controlled by the "--enable-vim-addons" and "--vimdatadir" configure
  options. (contribution from Felix Neumärker)

* If modulefile is fully read, cache the content read and the file
  header computed to avoid another file read if the same modulefile
  need to be read multiple times.

* Except for path, paths, list, avail and aliases module commands
  always fully read a modulefile whether its full content is needed or
  just its header to verify its validity. Proceed this way to only
  read file once on commands that first just check modulefile validity
  then read again valid files to get their full content.

* Introduce Modules Tcl extension library (written in C) to extend
  Tcl language in order to provide more optimized I/O commands to read
  a file or a directory content than native Tcl commands do.

* Install: add "--libdir", "--enable-libtclenvmodules", "--with-tcl"
  and "--with-tclinclude" options to configure script to control
  libtclenvmodules build and installation.

* When an error is caught during modulecmd.tcl first initialization
  steps, ensure the error report facility is initialized to render
  error message.

* When looking for modulefiles in enabled modulepaths, take
  ".modulerc" file found at the root of a modulepath directory into
  account. Which means these rc files are now evaluated like global rc
  files and can be used to define module aliases targeting modulefiles
  stored in the underlying file tree.

* Correctly get available default (-d) and latest (-L) version
  whether search pattern is passed with an ending forward slash
  character or not or if it contains a "*" wildcard character.

* Append a forward slash character to any directory result of an
  avail command to better distinguish these directories from regular
  files.

* Introduce the ability to control whether "avail" command search
  results should recursively include or not modulefiles from
  directories matching search query by use of the "--indepth" and "--
  no-indepth" command-line switches or the environment variable
  "MODULES_AVAIL_INDEPTH". Default behavior is set at the
  "./configure" time with the "--enable-avail-indepth" and "--disable-
  avail-indepth" switches. (fix issue #150)

* Update "bash", "fish" and "zsh" completion scripts to propose
  available modulefiles in the no in depth mode.

* Add the ability to graphically enhance some part of the produced
  output to improve readability by the use of the "--color" command-
  line switch or the "MODULES_COLOR" environment variable. Both accept
  the following values: "never", "auto" and "always". When color mode
  is set to "auto", output is colored if stderr is attached to a
  terminal. Default color mode could be controlled at configure time
  with the "--enable-color" and the "--disable-color" option, which
  respectively correspond to the "auto" and "never" color mode.

* Control the color to apply to each element with the
  "MODULES_COLORS" environment variable or the "--with-dark-
  background-colors" and "-- with-light-background-colors" configure
  options. These variable and options take as value a colon-separated
  list in the same fashion "LS_COLORS" does. In this list, each
  element that should be highlighted is associated to a Select Graphic
  Rendition (SGR) code.

* Inform Modules of the terminal background color with the
  "MODULES_TERM_BACKGROUND" environment variable or the "--with-
  terminal-background" configure option, which helps to determine if
  either the dark or light background colors should be used to color
  output in case no specific color set is defined with the
  "MODULES_COLORS".

* Color prefix tag of debug, error, warning, module error and info
  messages.

* Highlight the modulefile or collection name when reporting
  messages for a an action made over this modulefile or collection.

* Color the modulepaths reported on a "use" command.

* Highlight title of separator lines or column name of table header.

* Color modulepaths, directories, aliases and symbols reported by
  the "avail", "aliases", "list", "whatis" and "search" commands.

* When color mode is enabled and module aliases are colored, do not
  associate them a "@" tag as the color already distinguish them from
  regular modulefile.

* When color mode is enabled and a Select Graphic Rendition (SGR)
  code is set for the "default" modulefile symbol, apply this SGR code
  to the modulefile name instead of associating it the "default"
  symbol tag.

* Highlight matched module search query string among "avail",
  "whatis" and "search" command results.

* Highlight the modulefile and collection full path name on
  "display", "help", "test" and "saveshow" command reports.

* Color modulefile Tcl commands set in a modulefile on a "display"
  command report.

* Color module commands set in a collection on a "saveshow" command
  report.

* Re-introduce "clear" sub-command. (fix issue #203)

* Leverage "--force" command-line switch on "clear" sub-command to
  skip confirmation dialog. (fix issue #268)

* Init: improve readability of variable definition operations by
  writing one definition operation per line rather having multiple
  commands on a single line like "VAR=val; export VAR". (fix issue
  #225)

* Add the ability to define a site-specific configuration file with
  an environment variable: "MODULES_SITECONFIG". When set, the script
  file pointed by the variable is sourced (if readable) after the
  site-specific configuration file initially defined in
  "modulecmd.tcl". (contribution from Ben Bowers, fix issue #234)

* Doc: add description in the module.1 man page of "MODULERCFILE" in
  the environment section and "siteconfig.tcl" in the files section.

* Install: provide at installation time a bare site-specific
  configuration script in designated "etcdir" if no pre-existing
  "siteconfig.tcl" file is found at designated location.

* Introduce the "config" sub-command to get and set "modulecmd.tcl"
  options and to report its current state.

* Contrib: update "createmodule.py" script to support execution from
  the *cmd* shell. (contribution from Jacques Raphanel, fix issue
  #270)

* Add the ability to configure when unloading a module and multiple
  loaded modules match request if firstly loaded module should be
  chosen or lastly loaded module. Configure option "--with-unload-
  match-order" defines this setting which can be superseded with the
  "MODULES_UNLOAD_MATCH_ORDER" environment variable. This variable can
  be set with the option "unload_match_order" on the "config" sub-
  command. By default, lastly loaded module is selected. It is
  recommended to keep this behavior when the modulefiles used express
  dependencies between each other.

* Add the ability to configure whether an implicit default version
  should be defined for modules with no default version explicitly
  defined. When enabled, which stays the default behavior, a module
  version is automatically selected (latest one) when the generic name
  of the module is passed. When implicit default selection is
  disabled, the name of modules to evaluate should be fully qualified
  elsewhere an error is returned. This option is set at "./configure"
  time with the "--enable-implicit-default" and "--disable-implicit-
  default" options. It could be superseded with the
  "MODULES_IMPLICIT_DEFAULT" environment variable, that could be set
  with "config" module sub-command through the "implicit_default"
  option.

* Install: add to the configure script the "--with-locked-configs"
  option to ignore environment variable superseding of Modules
  configurations defined in "modulecmd.tcl" script. Lockable
  configuration option are "extra_siteconfig" and "implicit_default".
  Currently locked options are reported through the "locked_configs"
  option on the "config" sub-command.

* Introduce the ability to control the module search match. Search
  query string should match module name start or any part of module
  fully qualified name. Default search match behavior is set at
  "./configure" time with the "--with-search-match" option. It could
  be superseded with the "MODULES_SEARCH_MATCH" environment variable,
  that could be set with "config" module sub-command through the
  "search_match" option. Command-line switches "--starts-with" ("-S")
  and "--contains" ("-C") for "avail" module sub-command enable to
  supersede defined search match configuration.

* Introduce the ability not to set the shell startup file that
  ensure "module" command is defined once shell has been initialized.
  Setting shell startup file currently means defining "ENV" and
  "BASH_ENV" environment variables to the Modules bourne shell
  initialization script. "./configure" options "--enable-set-shell-
  startup" and "-- disable-set-shell-startup" define if shell startup
  should be set or not by default. It could be superseded with the
  "MODULES_SET_SHELL_STARTUP" environment variable, that could be set
  with "config" module sub-command through the "set_shell_startup"
  option.

* Cookbook: add the *test-modulefiles* recipe. (fix issue #182 with
  contribution from Colin Marquardt)

* Fix location of global RC file to "@etcdir@/rc" instead of
  "@prefix@/etc/rc" to cope with "@etcdir@" specific setup ("@etcdir@"
  defaults to "@prefix@/etc").

* Take into account Modules initialization configurations found in
  "etc" directory if they exist rather in "init" directory. If
  "initrc" configuration file is found in "etcdir" then it is
  preferred over "modulerc" file in "initdir". Following the same
  trend, "modulespath" configuration file is found in "etcdir" then it
  is preferred over ".modulespath" file in "initdir".

* Introduce the ability to install the Modules initialization
  configuration files in the "etcdir" rather than in the "initdir". A
  new configure option is introduced for this task: "--with-initconf-
  in". Accepted values for this option are: "etcdir" or "initdir"
  (default).

* Add the "--enable-modulespath" configure option, which is an alias
  for the "--enable-dotmodulespath" option as ".modulespath"
  configuration file is named "modulespath" when installed in
  "etcdic".

* Install: update RPM spec file to disable "set_shell_startup"
  option by default, set "/etc/environment-modules" as configuration
  directory and store Modules initialization configuration files in
  it.

* Report an error when a module load or unload evaluation aborts due
  to the use of the "break" or "exit" modulefile commands. This error
  notification clarifies that module evaluation failed. (fix issue
  #267)

* Remove the message block display output for the "reload", "purge"
  and "restore" sub-commands to preserve this output style for
  modulefile evaluation modes (load, unload and switch) and thus
  clarify understanding.

* When unloading a module that contains a "module load" or "module
  switch" modulefile command, inhibit the unload performed of the
  useless requirement when auto_handling mode is disabled if currently
  performing a "purge", "reload" or "restore" sub-command. As the
  unload sequence is determined and managed from these top commands.

* Add ability to control module command message verbosity with
  configuration option. Introduced verbosity levels from the least to
  the most verbose are "silent", "concise", "normal", "verbose" and
  "debug". This option could be set at "./configure" time with "--
  with-verbosity" option. It could be superseded with the
  "MODULES_VERBOSITY" environment variable, that could be set with
  "config" module sub-command through the "verbosity" option. Silent,
  verbose and debug verbosity modes can be set at the command-line
  level respectively with "--silent"/"-s", "--verbose"/"-v" and "--
  debug"/"-D" command-line switches. (fix issue #204)

* When verbosity level is "normal" or higher, reports every module
  loads or unloads performed to "restore" a collection or "source" a
  scriptfile, even if there is no specific message to output for these
  module evaluations. Clarifies what module evaluations have been
  triggered by these sub-commands.

* Also honor the "CLICOLOR" and "CLICOLOR_FORCE" environment
  variables to define color mode. (fix issue #279)


Modules 4.2.5 (2019-07-08)
==========================

* Correctly escape "?" character in shell alias. (fix issue #275)

* When resolving the enabled list of modulepaths, ensure resolved
  path entries are unique. (fix issue #274)

* Right trim '#' characters from the fetched modulefile magic cookie
  string to ensure a correct compatibility version comparison. Useful
  when modulefile first line is equal to "#%Module4.2##############".

* Fix argument parsing for the "append-path", "prepend-path" and
  "remove-path" modulefile commands to consider every arguments found
  after the variable name as variable values and not command option
  even if argument starts with "-" character. (fix issue #278)

* Fix automatic loading of modulefiles when multiple module names
  are set on a single "module load" modulefile command. When
  auto_handling mode was disabled, the load of not loaded modules was
  not achieved as soon as some modules on this list were already
  loaded. (fix issue #281)


Modules 4.2.4 (2019-04-26)
==========================

* Better track each module evaluation and the context associated to
  it in order to report a more accurate information on the additional
  modules loaded or unloaded when proceeding the main evaluation
  request. (fix issue #244, #245, #246, #247 and #248)

* Doc: preserve quotes and dashes when making HTML docs. (fix issue
  #250 with contribution from Riccardo Coccioli)

* Fix hanging "list" sub-command when terminal width is equal to the
  single column text width to be printed. (contribution from Jesper
  Dahlberg)

* During an additional evaluation triggered by an automated module
  handling mechanism, ensure warning and error messages are reported
  under the message block of the main evaluation. (fix issue #252)

* During the unload of a module when the automated module handling
  mode is disabled, report a warning message for each unload of a
  useless requirement that fails as done when the automated module
  handling mode is enabled. (fix issue #253)

* When multiple modules are listed on a "prereq" command, drop the
  output of those modules that fails to load (by the *Requirement
  Load* automated mechanism) to only keep the output of the module
  whose load succeed. (fix issue #254)

* Fix "switch" sub-command when the switched-off module cannot be
  unloaded when other loaded modules depend on it. Whole switch
  process is failed and no load of the switched-on module is
  attempted. (fix issue #251)

* When switching modules, report failure of switched-off module
  unload or switched-on module load under the message block of the
  switch action. A failed switched-off module unload is reported as an
  error, as it aborts the switch evaluation, whereas a failed
  switched-on module load is reported as a warning. (fix issue #255)

* When a module requirement is seen missing but the load of this
  module was attempted, report a more specific error or warning
  message to let user understand that the load of the requirement was
  attempted but failed. (fix issue #257)

* When loading a module, report any missing requirement on the
  message reporting block corresponding to this module load. This
  warning or error message comes in addition to the eventual
  *Requirement Load* message reported under the message block of the
  main evaluation. (fix issue #258)

* When unloading a module which has some dependent module still
  loaded, produce a more specific error or warning message if an
  evaluation of these dependent modules has been realized or if the
  unload of the required module is forced. (fix issue #259)

* When a conflicting module is seen loaded but the unload of this
  module was attempted, report a *Conflict Unload* error or warning
  message toward the main evaluation message block. (fix issue #261)

* When loading a module, report any loaded conflict on the message
  reporting block corresponding to this module load. This warning or
  error message comes in addition to the eventual *Conflict Unload*
  message reported under the message block of the main evaluation.
  (fix issue #261)

* Correctly report loading state of conflicting module. (fix issue
  #262)

* Adapt warning, error and info messages relative to the *Dependent
  Reload* mechanism to distinguish the unload phase from the load
  (reload) phase of this mechanism. In the automated module handling
  summary report, unloaded modules via this mechanism are reported in
  the *Unloading dependent* list and modules reloaded afterward are
  reported against the *Reloading dependent* list. (fix issue #263)

* When the automated module handling mode is disabled, do not
  attempt to load a requirement expressed in a modulefile with a
  "module load" command, if this requirement is already loaded or
  loading.

* Skip load or unload evaluation of a module whose respectively load
  or unload was already attempted but failed. If this second
  evaluation attempt occurs within the same main evaluation frame.
  (fix issue #264)

* When reloading modules through the *Dependent Reload* automated
  mechanism, prevent modules to automatically load of other modules
  with the "module load" modulefile command, as it is done for the
  "prereq" command. (fix issue #265)

* Raise an error when an invalid option is set on "append-path",
  "prepend-path" or "remove-path" modulefile command. (fix issue #249)

* Zsh initializes by default the "MANPATH" environment variable to
  an empty value when it starts. To preserve "manpath" system
  configuration even after addition to this variable by modulefiles,
  set "MANPATH" variable to ":" if found empty. (improve fix for issue
  #224)

* Doc: provide a short installation guideline in README file. (fix
  issue #230)


Modules 4.2.3 (2019-03-23)
==========================

* Add all the module dependency-related internal information to
  those saved prior a modulefile evaluation in order to correctly
  restore internal state in case modulefile evaluation fails.

* Init: in shell initialization scripts, initialize "MANPATH" if not
  set with a value that preserves "manpath" system configuration even
  after addition of paths to this variable by modulefiles. (fix
  issue#224)

* Enable to define an entire path entry to the "MODULEPATH" variable
  which corresponds to a variable reference only. (fix issue#223)

* Cookbook: add the *modulefiles-in-git* recipe. (contribution from
  Scott Johnson)

* When "module switch" commands are found in modulefiles, track
  switched-off modulefile as a conflict and switched-to modulefile as
  a requirement to apply same behaviors than for "module load" and
  "module unload" commands in modulefiles. If "module switch" has only
  one argument, do not define a conflict toward switched-off
  modulefile. *CAUTION: it is not recommended to use `module switch`
  command in modulefiles*. (fix issue#229)

* When unloading a module, revert "module switch" commands found in
  modulefile: switched-on module is converted to a "module unload",
  like for "module load" command. Nothing is done for switched-off
  module, like for "module unload" command. (fix issue#226)

* For default element in a modulefile directory which is a module
  alias that points to a modulefile, when this modulefile is loaded,
  it receives as alternative names the eventual module aliases set on
  the distant directory holding the alias pointing to it. (fix
  issue#231)

* When unloading a module that contains "module load" or "module
  switch" commands in its modulefile, select for unload the
  automatically loaded requirement module which has been loaded prior
  its dependent. (fix issue#232)

* Doc: describe Emacs settings useful for adhering to coding
  conventions in CONTRIBUTING guide. (fix issue #233 with contribution
  from Ben Bowers)

* When looking for a loaded or loading dependency requirement,
  select among the eventual multiple candidates the closest match to
  the dependent module.

* During the unload of a module, if the unload of one of its
  dependent (by the *Dependent Unload* mechanism) fails, abort the
  whole unload process. Exception made if the force mode is enabled.
  In this case failing module stays loaded and the *Dependent Unload*
  mechanism continues with next module to unload.

* During the unload of a module, if the unload of one of its useless
  requirements (by the *Useless Requirement Unload* mechanism) fails,
  keep the requirements of this failing module loaded. Such error is
  reported as a warning and it does not stop the whole unload process.
  (fix issue#240)

* During the load or the unload of a module, if the unload of one of
  its dependent (by the *Dependent Reload* mechanism) fails, abort the
  whole unload or load process. Exception made if the force mode is
  enabled. In this case failing module stays loaded and *Dependent
  Reload* mechanism continues with next module to unload. This failing
  module is removed from the *Dependent Reload* list, so it will not
  take part of the load phrase of the mechanism. (fix issue#239)

* During the load or the unload of a module, if the load of one of
  its dependent (by the *Dependent Reload* mechanism) fails, abort the
  whole unload or load process. Exception made if the force mode is
  enabled. In this case failing module stays loaded and *Dependent
  Reload* mechanism continues with next module to load. When the
  mechanism is applied during a "switch" command, force mode is
  enabled by default on the load phase. (fix issue#241)

* When reloading all loaded modules with the "reload" sub-command,
  if one reloading module fails to unload or load, abort the whole
  reload process to preserve environment sanity. (fix issue#237)

* During the unload of a module when the automated module handling
  mode is disabled and this module declares its requirements with the
  "module load" modulefile command. If the unload of one of its
  useless requirements (by the *Useless Requirement Unload* mechanism)
  fails, whole unload process is not aborted and continue with next
  module to unload. (fix issue#238)

* Contrib: add "mtreview" utility script that analyzes test suite
  log file to compare actual and expected output of failed test. "mt"
  does not output the full test suite logs anymore but only the
  information produced by "mtreview" on failed tests.

* Install: exclude Continuous Integration configurations from dist
  tarballs.


Modules 4.2.2 (2019-02-17)
==========================

* Correct the *Dependent Unload* mechanism when it triggers the
  unload of 2 modules making together a requirement from another
  module. This module is now also added to the dependent modules to
  unload.

* Doc: add a cookbook section in the documentation and port there
  the 3 pre-existing recipes: *inhibit-report-info*, *top-priority-
  values* and *unload-firstly-loaded*.

* Doc: add a CONTRIBUTING guide.

* Doc: fix a typo on the Python initialization example in module man
  page.

* Doc: add a FAQ entry to describe the use of module from Makefile.
  (with contribution from Robert McLay)

* Trim any white-space, newline or ";" characters at the beginning
  or end of the function body passed to set-function modulefile
  command.

* Init: add recognition of the "--auto", "--no-auto" and "--force"
  command-line switches in fish shell completion script.

* Init: add recognition of the "--auto", "--no-auto", "--force", "--
  paginate" and "--no-pager" command-line switches in zsh shell
  completion script.

* When the load of a modulefile is asked but a conflict is
  registered against this modulefile by an already loaded module, the
  load evaluation is now performed and the conflict is checked after
  this evaluation. If the conflict is still there, this evaluation
  (and the evaluation of its requirements) is rolled back. (fix
  issue#216)

* Init: fix "_module_not_yet_loaded" alias in tcsh completion script
  to handle situation when "noclobber" variable is set. Also ensure
  actual "rm" command is called and not an alias. (fix issue#219)

* Fix warning message when the load of a modulefile is forced over a
  reflexive conflict (message was reported twice).

* When looking at the dependency of a loaded module, only consider
  requirement loaded before dependent module (holding a prior position
  in the loaded module list) as valid. Those loaded after dependent
  module are considered as an unmet dependency thus they are not
  taking part in the *Dependent Unload*, the *Useless Requirement
  Unload* and the *Dependent Reload* mechanisms.


Modules 4.2.1 (2018-11-11)
==========================

* Cookbook: add the *inhibit-report-info* recipe.

* Cookbook: port *unload-firstly-loaded* and *top-priority-values*
  recipes to v4.2.

* Init: fix listing of loaded modules for *fish* and *tcsh* shell
  completions.

* Init: fix saved collection listing when no collection found for
  *bash*, *zsh*, *tcsh* and *fish* shell completions.

* Adapt "system" modulefile Tcl command to execute the command
  passed as argument through shell, like it is performed on
  compatibility version. (fix issue#205)

* Correctly filter modulefile search memory cache entries when using
  a full search result to search later on a specific modulefile.

* Prefix debug messages by information on the current modulefile or
  modulerc interpreter if any.

* Init: fix listing of loaded modules on unload and switch sub-
  commands for *bash* shell completion.

* Refrain "module unload" modulefile command from unloading a module
  required by another loading module.

* Enable "is-loaded" modulefile Tcl command in modulerc
  interpretation context, like done on compatibility version. (fix
  issue#207)

* Check a required module is not already loading before attempting
  to load it. Helps to handle cyclic dependencies.

* Compute loaded modules requirement dependency relations without
  cycle and consider the module closing the cycle in a constraint
  violation state to avoid reloading loops on the *Dependent Reload*
  mechanism.

* Safely unset dependency reference when computing dependency
  relations as some dependencies expressed may target same module.

* Ensure a loaded module matching multiple entries of a same *or*
  "prereq" will just be considered as one module matching this
  requirement.

* Init: quote prompt in *csh* and *tcsh* script with ":q" rather
  double quotes to accommodate prompts with embedded newlines. (fix
  issue#209 with contribution from Satya Mishra)

* Init: skip shell environment alteration if "autoinit" command
  fails. (fix issue#208)

* Reword path-like variable element counter reference handling to
  simply ignore the counter values not coherent with the content of
  related path-like variable. (fix issue#206)


Modules 4.2.0 (2018-10-18)
==========================

* Add "chdir" and "puts" environment settings to the per-modulefile
  evaluation saved context. So previous values of these settings are
  restored in case of evaluation failure.

* Fix save and restore of "x-resource" environment settings on the
  per-modulefile evaluation context.

* Use the correct warning procedure to report the full reference
  counter inconsistency message (so this message is fully inhibited
  during global "whatis" evaluations).

* Make "append-path", "prepend-path", "remove-path" and "unsetenv"
  commands alter "env" Tcl global array during "display", "help",
  "test" or "whatis" evaluation modes. Thus an invalid argument passed
  to these commands will now raise error on these modes. (see
  Environment variable change through modulefile evaluation context
  section in MIGRATING document)

* On "whatis" mode, "append-path", "prepend-path", "remove-path",
  "setenv" and "unsetenv" commands initialize variables if undefined
  but do not set them to their accurate value for performance concern.

* Clear value instead of unsetting it during an unload mode
  evaluation of "setenv" or "*-path" commands to avoid breaking later
  reference to the variable in modulefile.

* Make "getenv" command returns value on "help", "test" or "whatis"
  evaluation modes. (fix issue#188)

* Add an argument to the "getenv" command to return the value of
  this argument if the queried variable is undefined.

* Use a different modulefile interpreter for each evaluation mode.

* Adapt the procedure called for each modulefile command depending
  on the evaluation mode to adapt behavior of these commands to the
  module command currently running.

* Report calling name and arguments for modulefile commands on
  "display" mode. For the commands evaluated during this mode, trigger
  this report at the end of the evaluation.

* Inhibit "chdir", "conflict", "module", "module-log", "module-
  trace", "module-user", "module-verbosity", "prereq", "set-alias",
  "system", "unset-alias", "x-resource" commands on "help", "test" and
  "whatis" evaluation modes.

* Ignore "chdir", "module", "module-trace", "module-verbosity",
  "module-user" and "module-log" commands found during modulerc
  evaluation.

* Correctly restore an empty string value on sub-interpreter global
  variables when sanitizing this interpreter between two
  modulefile/modulerc evaluations.

* Cache in memory results of a modulefile search to reuse it in case
  of rerun instead of re-walking the filesystem.

* Evaluate global rc files once module sub-command is known and
  registered, so it can be queried during their evaluation.

* Rename "_moduleraw" shell function in "_module_raw" to use a
  common "_module_" prefix for all module-related internal shell
  functions.

* Install: add "--enable-append-binpath" and "--enable-append-
  binpath" configure options to append rather prepend the bin or man
  directory when adding them to the relative environment variable.

* Doc: clarify documentation for module usage on scripting language
  like Perl or Python to mention that arguments to the "module"
  function should be passed as list and not as a single string.

* When interpreting a "setenv" modulefile order during an unload
  evaluation, variable is still set to be unset in generated shell
  code but it is set to the value defined on the "setenv" order in the
  interpreter context instead of being cleared.

* Register the conflicts defined by loaded modules in the
  environment (variable "MODULES_LMCONFLICT") and ensure they keep
  satisfied. (see Modulefile conflict constraints consistency section
  in MIGRATING document)

* Register the prereqs defined by loaded modules in the environment
  (variable "MODULES_LMPREREQ") and ensure they keep satisfied. (see
  Modulefile prereq constraints consistency section in MIGRATING
  document)

* Introduce the automated module handling mode, which consists in
  additional actions triggered when loading or unloading a modulefile
  to satisfy the dependency constraints it declares. Those actions are
  when loading a modulefile: the *Requirement Load* and the *Dependent
  Reload*. When unloading a modulefile, *Dependent Unload*, *Useless
  Requirement Unload* and *Dependent Reload* actions are triggered.
  (see Automated module handling mode section in MIGRATING document)

* Track the loaded modules that have been automatically loaded (with
  environment variable "MODULES_LMNOTUASKED") to distinguish them from
  modules that have been explicitly asked by user. This information
  helps to determine what module becomes a useless requirement once
  all its dependent modules are unloaded.

* Track in saved collections the loaded modules that have been
  automatically loaded by add of a "--notuasked" argument to "module
  load" collection lines. So this information is restored in loaded
  environment when collection is restored. This "--notuasked" argument
  is ignored outside of a collection restore context.

* Consider modules loaded from a "module source" file as explicitly
  asked by user.

* Install: add "--enable-auto-handling" configure option to enable
  or disable the automatic modulefile handling mechanism.

* Process list of loaded modules or modules to load one by one
  during the "restore", "purge" and "reload" sub-commands whatever the
  auto handling mode is.

* Add the ability to control whether the auto_handling mode should
  be enabled or disabled with an environment variable called
  "MODULES_AUTO_HANDLING" or from the command-line with "--auto" and "
  --no-auto" switches. These command-line switches are ignored when
  called from modulefile.

* Init: add pager-related command-line options in shell completion
  scripts.

* Doc: describe "MODULES_LMCONFLICT", "MODULES_LMPREREQ" and
  "MODULES_LMNOTUASKED" in module.1 man page.

* Add "-f" and "--force" command-line switches to by-pass dependency
  consistency during "load", "unload" or "switch" sub-commands. (see
  By-passing module defined constraints section in MIGRATING document)

* Disallow collection "save" or loaded modules "reload" if some
  loaded modules have some of their dependency constraints
  unsatisfied.

* The *Dependent Reload* action of a "load", "unload" and "switch"
  sub-commands excludes modules that have unsatisfied constraints and
  includes modules whose constraints are satisfied again (when sub-
  command process solves a conflict for instance).

* Doc: describe "--force", "--auto" and "--no-auto" command-line
  switches and "MODULES_AUTO_HANDLING" variable in module.1 man page.

* Ignore directories ".SYNC" (DesignSync) and ".sos" (SOS) when
  walking through modulepath directory content. (contribution from
  Colin Marquardt)

* Install: look for "make" rather "gmake" on MSYS2.

* Fix "exec()" usage in Python module function definition to
  retrieve the correct return status on Python3.

* Cookbook: add the *top-priority-values* and *unload-firstly-
  loaded* recipes.

* Install: add "gcc" to the build requirements in RPM specfile.

* Silent any prereq violation warning message when processing
  *Dependent Reload* mechanism or "purge" sub-command.

* Doc: mention "createmodule.sh" and "createmodule.py" scripts in
  FAQ. (fix issue#189)

* Register all alternative names of loaded modules in environment
  with "MODULES_LMALTNAME" variable. These names correspond to the
  symbolic versions and aliases resolving to the loaded modules. Helps
  to consistenly solve "conflict" or "prereq" constraints set over
  these alternative names. (fix issue#143 / see Consistency of module
  load/unload commands in modulefile section in MIGRATING document)

* Doc: describe "MODULES_LMALTNAME" in module.1 man page.

* Install: add "--with-bin-search-path" configure option to get in
  control of the path list used to search the tools required to build
  and configure Modules. (fix issue#164)

* Install: add "--enable-silent-shell-debug-support" configure
  option to add the ability to control whether or not code to support
  silent shell debug should be added to the module function and sh-
  kind initialization scripts. (fix issue#166)

* Install: add "--enable-quarantine-support" configure option to add
  the ability to control whether or not code to support quarantine
  mechanism should be added to the module function and initialization
  scripts. (fix issue#167)

* Check version set in modulefile magic cookie. If modulefile sets a
  version number greater than "modulecmd.tcl" script version, this
  modulefile is not evaluated like when no magic cookie is set at all.
  (fix issue#171 / see Express Modules compatibility of modulefile
  with versioned magic cookie section in MIGRATING document)

* Fix uninitialized variable in procedure producing list of element
  output. (fix issue#195)

* Ensure the consistency of "module load" modulefile command once
  the modulefile defining it has been loaded by assimilating this
  command to a "prereq" command. Thus the defined constraint is
  recorded in the "MODULES_LMPREREQ" environment variable. Same
  approach is used for "module unload" modulefile command which is
  assimilated to a "conflict" command. Thus the defined constraint is
  recorded in the "MODULES_LMCONFLICT" environment variable. (see
  Modulefile alias and symbolic modulefile name consistency section in
  MIGRATING document)

* Only look at loaded modules when unloading so unloading an
  nonexistent modulefile does not produce an error anymore. (fix
  issue#199)

* Report error raised from modulefile evaluation as "ERROR" rather
  "WARNING", like when a conflict constraint is hit. Moreover this
  kind of evaluation error is now silenced on global evaluation like
  when proceding "avail" or "search" sub-commands.

* Record messages to report them by block on when processing a
  "load" or an "unload" modulefile evaluation to improve readability
  on these evaluating modes that may cascade additional actions. (see
  Improved module message report section in MIGRATING document)

* Foreground "load", "unload", "switch" and "restore" actions (ie.
  asked on the command-line) now report a summary of the additional
  load and unload evaluations that were eventually triggered in the
  process.

* Support "del" and "remove" aliases for "unload" sub-command like
  on compatibility version. (fix issue#200 with contribution from
  Wenzler)

* Correctly transmit the arguments along with the command to execute
  on "system" modulefile command. (fix issue#201)

* Contrib: add "mt" utility script which helps to run just specific
  part of the test suite.

* Introduce "set-function" and "unset-function" modulefile commands
  to define shell function on sh-kind and fish shells. (fix issue#193
  with contribution from Ben Bowers)


Modules 4.1.4 (2018-08-20)
==========================

* Doc: fix typo on "getenv" command description in modulefile(4) man
  page and clarify this command should be preferred over "::env"
  variable to query environment variable value in modulefile.

* Init: fix "bash" and "zsh" completion scripts to enable Extended
  Regular Expression (ERE) on "sed" command with "-E" argument (rather
  "-r") for compatibility with OS X's and BSDs' sed. (fix issue#178)

* Handle default version sets on an hidden modulefile (were not
  found previously). (fix issue#177)

* Init: fix "ksh" initialization script for ksh88 compatibility.
  (fix issue#159)

* Install: use "sed" command rather "grep" and "cut" in "configure"
  and "Makefile" scripts. (fix issue#175 with contribution from
  Michael Sternberg)

* Fix typo, tab indentation and pipe opening mode on
  "createmodule.py" utility script. (contribution from Jan Synacek)

* Check "ModulesVersion" value set from ".version" rc file to ensure
  this value refers to a version name in current directory. Report
  error if a nested value is detected and ignore this value. (fix
  issue#176)


Modules 4.1.3 (2018-06-18)
==========================

* Make "setenv" command alter "env" Tcl global array during "help",
  "test" or "whatis" evaluation modes. (fix issue#160)

* Doc: describe MANPATH variable special treatment on compatibility
  version in diff_v3_v4 document.

* Initialize and export _moduleraw SH shell function if "stderr" is
  attached to a terminal. Was previously checking "stdout". (fix
  issue#169)

* For "csh" shells, quote code generated by modulecmd.tcl to pass it
  to the "eval" shell command.

* Escape special characters when producing code to define shell
  aliases (fix issue#165)

* Correct modulefile lookup when a modulefile directory is
  overwritten by a module alias definition but it contains an empty
  sub-directory. (fix issue#170)

* Doc: describe "getenv" command in modulefile(4) man page.

* Improve SH shell detection in profile.sh initialization script to
  use shell variable on "bash" or "zsh" to determine current shell
  name. (fix issue#173)


Modules 4.1.2 (2018-03-31)
==========================

* Add an example global rc file in "contrib/etc" directory that
  ensures "MODULEPATH" is always defined.

* Check "HOME" environment variable is defined on "savelist" and
  "is- saved" commands or raise error if not.

* Fix saving of deep module default version in collection when
  version pinning is disabled: if "foo/bar/version" is default version
  for "foo", collection will retain just "foo" (was retaining
  "foo/bar").

* Enable to save and restore collections containing full path
  modulefiles eventually with no modulepath defined.

* Run "puts" command not related to "stderr" or "stdout" channels in
  calling modulefile context to correctly get access to the targeted
  file channel. (fix issue#157)

* Quote "autoinit" result for eval interpretation on SH-kind shells
  to avoid parameter expansion to randomly occur on generated code
  depending on file or directory names of current working directory.
  (fix RH bug#1549664)

* Ignore empty elements found in "MODULEPATH", "LOADEDMODULES" or
  "_LMFILES_" to ensure all elements in these variables are non-empty
  strings.

* Raise error if loaded environment is in an inconsistent state when
  calling commands requiring correlation of information from the
  "LOADEDMODULES" and the "_LMFILES_" environment variables. Error
  raised on "load", "unload", "switch", "reload", "purge", "list",
  "save" and "restore" commands.  May affect "info-loaded" or "is-
  loaded" commands if module passed as argument to these command is
  specified as a full path modulefile.

* Fix "list" command to process loaded modules information before
  performing any content output.

* Install: adapt "configure" script and Makefiles to support
  installation on Cygwin system.

* Detect terminal width on Windows "cmd" terminal with "mode"
  command.

* Improve Windows "cmd" shell support: error code returned, echoing
  text, shell alias creation and removal, working directory change.

* Raise error when an empty module name is passed to module sub-
  commands like "load", "display" or "unload".

* Raise error when an empty collection name is passed to module sub-
  commands like "save", "saveshow" or "restore".

* Raise error when an empty path is passed to module "unuse" sub-
  command, like already done on "use" sub-command.

* Clear argument list if an empty module command name is passed.

* Fix "module" function definition for all shells in "autoinit"
  command to correctly handle empty-string parameters or parameters
  containing white-spaces, quotes, escape characters.

* Fix "module" function definition for Python to accept being called
  with no argument.

* Fix parameter expansion on "module" function for all SH-kind
  shells when quarantine mode is activated.

* Escape "\" character when producing R shell code.


Modules 4.1.1 (2018-02-17)
==========================

* Make separator lines, used on "display" command result for
  instance, fit small screen width.

* Install: give ability to build and install Modules from git
  repository without documentation if "sphinx-build" cannot be found.

* Install: adapt "configure" script and Makefiles to support
  installation on FreeBSD, Solaris and OS X systems. (fix issue#147)

* Rework code generated by "autoinit" for sh-kind shells to avoid
  use of local variables as those are defined differently through the
  sh variants. (also fix issue#147)

* Init: use a default value on undefined variables in sh-kind
  scripts to avoid unbound variables in bash "-eu" mode. (fix
  issue#151)

* Correctly detect terminal column number on Solaris.

* Init: fix csh init script to get compatibility with pure csh shell

* Sanitize content of "MODULEPATH" before using it at run-time, to
  make potential relative paths absolute, remove trailing slashes,
  etc. (fix issue#152)

* Check loaded modulefiles still exists before displaying statistics
  on them during a "list" action.

* Use a specific reference counter variable name
  ("MODULES_MODSHARE_<VAR>" instead of "<VAR>_modshare") for DYLD-
  specific variables. (fix issue#153)

* No error raise when updating a DYLD or LD path-like variable on OS
  X when System Integrity Protection (SIP) is enabled. In this
  situation, these variables are not exported in subshell context, so
  they appear undefined.

* Init: protect arguments passed to the "_moduleraw" sh function
  from interfering content of current working directory. (fix
  issue#154)

* Install: move "hostname" RPM requirement to the compat sub-
  package.

* Start pager process only if some text has to be printed.
  (partially fix issue#146)

* Ignore "PAGER" environment variable to configure Modules pager to
  avoid side effects coming from a general pager configuration not
  compatible with Modules pager handling. (fix issue#146)

* Do not blank anymore default Modules pager options if default
  pager is "less" when the "LESS" environment variable is defined.
  (fix issue#146)

Warning: With this bugfix release, changes have been made on the
  pager setup to avoid side effects coming from the system general
  pager configuration. As a result "PAGER" environment variable is now
  ignored and "MODULES_PAGER" should be used instead to adapt Modules
  pager configuration at run-time.


Modules 4.1.0 (2018-01-15)
==========================

* Extend stderr output redirection on sh-kind shells to all
  terminal- attached shell session, not only interactive shell
  session.

* Extend shell code produced by the "autoinit" command to perform
  the same environment initialization as done in "init" shell scripts
  (default value set for module-specific environment variables, parse
  or source of configuration files).

* Make init shell scripts rely on "autoinit" command to define the
  "module" command and setup its default environment.

* Fix error rendering code for Tcl shell by producing a call to the
  "error" procedure.

* Introduce pager support to handle informational messages, using
  "less" command with "-eFKRX" options by default. Environment
  variable "MODULES_PAGER" or "PAGER" may be used to supersede default
  pager command and options. "--paginate" and "--no-pager" switches
  enable or disable pager from the command line.

* Install: add "--with-pager" and "--with-pager-opts" configure
  options to define default pager command and its relative command-
  line options.

* Introduce quarantine mechanism to protect module execution against
  side effect coming from the current environment definition.
  Variables whose name has been put in "MODULES_RUN_QUARANTINE" will
  be emptied or set to the value hold by "MODULES_RUNENV_<VAR>" in the
  modulecmd.tcl run-time environment. Quarantine variable original
  value is then restored within modulecmd.tcl execution context once
  it has started.

* Install: add "--with-quarantine-vars" configure option to define
  at build time the "MODULES_RUN_QUARANTINE" and
  "MODULES_RUNENV_<VAR>" environment variables set in initialization
  scripts.

* Add "MODULES_SILENT_SHELL_DEBUG" environment variable to disable
  on sh shell and derivatives any "xtrace" or "verbose" debugging
  property for the duration of either the module command or the module
  shell initialization script. (fix issue#121)

* Change error code produced by modulecmd.tcl for the Tcl, Perl,
  Python, Ruby, CMake and R scripting languages to return a 'false'
  boolean value in case of error rather raising a fatal exception.

* Adapt module function definition for Tcl, Perl, Python, Ruby,
  CMake and R scripting languages to always return a value, result of
  the modulecmd.tcl run. When modulecmd.tcl run does not produce a
  specific status, a 'true' boolean value is returned. On CMake,
  resulting value is returned though a "module_result" global
  variable.

* Spool content sent to the stdout channel with "puts" command
  during a modulefile interpretation, to effectively transmit this
  content to stdout after rendering the environment changes made by
  this modulefile. (fix issue#113)

* Introduce "append-path", "prepend-path", "remove-path" and "is-
  loaded" module sub-commands, based on existing modulefile-specific
  Tcl commands. (fix issue#116)

* Introduce "is-saved", "is-used" and "is-avail" modulefile Tcl
  commands and module sub-commands to test availability of collection,
  modulepath or modulefile.

* Raise error when a call to "path" or "paths" module sub-commands
  is attempted during a modulefile interpretation. Both commands now
  return text rather print text on scripting languages. An empty
  string is returned in no match case instead of a false boolean
  value.

* Introduce "module-info loaded" modulefile command and its module
  sub-command counterpart "info-loaded". This new command returns name
  of the modules currently loaded corresponding to the name passed as
  argument. (fix issue#3)

* Fix "is-loaded" command to correctly handle multiple module names
  passed as argument (fix issue#138)

* Support no argument on "is-loaded", "is-saved" and "is-used"
  commands to return if anything is respectively loaded, saved or
  used.

* Interpret "module source" command set in modulefile in "unload"
  mode when the modulefile itself is interpreted in this mode.

* Consider a modulefile passed with name starting by "./" or "../" a
  full path name modulefile, like those starting by "/". These kind of
  names are converted to absolute path names, for instance to register
  them in loaded modulefile list during a "load" command.

* Correlate modulefile passed as full path name (starting by either
  "./", "../" or "/") to already loaded modulefile registered with
  regular module name (file name without its modulepath prefix) to
  prevent for instance from loading twice same modulefile. Correlate
  in the same way regular module name to already loaded full path name
  modulefile.

* Introduce "MODULES_COLLECTION_PIN_VERSION" environment variable to
  record modulefile version number when saving collections even if
  version corresponds to the default one. (fix issue#89)

* Fix location of "etc/rc" global RC file to "@prefix@/etc/rc"
  instead of "$MODULESHOME/etc/rc" not to depend on "MODULESHOME"
  environment variable value.

* Strengthen argument check for "append-path", "prepend-path" and
  "remove-path" modulefile Tcl commands and module sub-commands. Raise
  error if argument list is not correct.

* Fix support for the "--delim=C" argument form on "append-path",
  "prepend-path" and "remove-path" commands.

* Fix path reference counter handling in case path element is an
  empty string. Distinguish an empty path element from a variable set
  empty to clear it.

* Pass multiple path elements separated by delimiter character as
  one string on "append-path", "prepend-path" and "remove-path"
  commands.

* Accept multiple path element arguments on "append-path", "prepend-
  path" and "remove-path" commands.

* Introduce the "--duplicates" argument option to "append-path" and
  "prepend-path" commands to add a path element already registered in
  variable.

* Introduce the "--index" argument option to "remove-path" command
  to delete a path entry by passing its position index in variable.

* Provide the ability to setup a site-specific configuration sourced
  at the start of "modulecmd.tcl" main procedure. This configuration
  is a Tcl script named "siteconfig.tcl" which enables to supersede
  any Tcl definition made in "modulecmd.tcl". Location of this file is
  controlled at configure time with the "--etcdir" option.

* Add the ability to handle paths containing reference to
  environment variable in "MODULEPATH". When these kind of paths are
  used by "module" command, the variable references are converted to
  their corresponding value or to an empty string if they are not
  defined.

* Enclose value set to environment variable on Tcl within curly
  braces rather double quotes to protect special characters in it from
  interpretation.

* Correctly parse ".modulespath" initialization file to handle lines
  without any "#" character or to handle files with no content to
  extract.

* Re-introduce the "--enable-versioning" configure option, which
  appends Modules version to installation prefix and deploy a
  "versions" modulepath shared between all versioning enabled Modules
  installation. A modulefile corresponding to Modules version is added
  to the shared modulepath and enables to switch from one Modules
  version to another.

* Fix removal of CMake generated temporary script file by stripping
  newline character from script file name.

* Add "MODULES_CMD" environment variable to expose path to the
  currently active module command script. This variable is set at
  initialization time.

* Introduce "modulecmd" wrapper script, installed in binary
  directory, which executes the active module command.

* Fix modulefile Tcl interpreter reset when handling list variables.
  (fix issue#145)

* Introduce 'module-virtual' modulefile Tcl command to associate a
  virtual module name to a modulefile. This module can be located with
  its virtual name and the associated modulefile is the script
  interpreted when loading, unloading, etc.

* Resolution of relative paths occurring during a modulefile
  interpretation to target a modulefile or a modulepath now takes the
  directory of the currently interpreted modulefile as the current
  working directory to solve the relative paths.


Modules 4.0.0 (2017-10-16)
==========================

Starting with this release, modules-tcl has become Modules. The
following changes describe the differences with last modules-tcl
release (1.923). To learn about the changes between this release and
last Modules 3.2 release, please see the MIGRATING document.

* Relax constraint on command-line argument position so options and
  switches can be passed either before or after command name.

* Report "unsupported option" warning rather stop on error when
  compatibility-version specific command-line switches are passed ( "
  --force", "--human", "--verbose", "--silent", "--create", "--icase",
  "--userlvl").

* Keep empty "module load" line in shell configuration files after
  running the "initrm" or "initclear" commands.

* Always return the value of "tcl_platform(osVersion)" for "uname
  release"

* Optimize code output, for Perl to only return "1;" once for a no-
  operation situation and for Python to not "import os" when there is
  only an error to render.

* Use value of system command "uname -n" for "uname nodename".

* Add support for CMake *shell*

* Ignore "/" character used as suffix in modulefile name passed on
  command line.

* Rename Perl initialization script in "perl.pm" and Python in
  "python.py".

* Add support for Ruby *shell* (with contribution from Tammo Tjarks)

* Add support for R *shell* (with contribution from Roy Storey)

* When a *default* is set for a given module name, target modulefile
  can be referred on as *modulename/default* in addition to just
  *modulename*.

* Locate symbolic versions on "avail" command even these symbols are
  set over a module alias or another symbolic version. In this
  situation the symbol spread along the resolution path until reaching
  a modulefile.

* Define a more standard shebang on modulecmd.tcl script.

* Determine modulefile corresponding to given module name using the
  loaded context only on "unload" situation.

* Enable to unload *mod/dir/subdir/vers* when unload of *mod* or
  *mod/dir* asked. Was previously working only if deep module to
  unload was also the default version for these root names.

* Make -l/-t switches mutually exclusive. Last switch mentioned on
  the command-line is honored.

* Output parsable modulepath header when -l/-t switches are enabled.

* When searching for a module in a given modulepath directory, if a
  module alias or a symbolic version matches searched module but the
  target of this alias or symbol is not found in current modulepath
  directory, search for this target restarting search from the first
  modulepath in list to ensure modulepath priority.

* Solve aliases or symbolic versions looking for all modulepaths on
  "search" and "paths" commands. Was previously solved if their target
  was found in same modulepath directory.

* Add support for hidden *dot* modulefiles. A hidden modulefile does
  not appear in case of wild search, it is only returned when search
  is about its exact name.

* No table header print in --long mode on an "avail" command if no
  result are returned.

* Add blank line between displayed list of elements, for instance
  between modulepath content on "avail" command.

* Improve readability of error messages encountered during
  modulefile execution by putting Tcl error message first after the
  "Module ERROR" prefix.

* Do not exit immediately when an internal error occurs in currently
  interpreted modulefile. Consider this interpretation as failed and
  continue to proceed the other modulefile arguments.

* When multiple modulefiles are passed on "display", "help" and
  "test" commands only output one separator line between 2 interpreted
  modulefiles.

* Fix environment settings stack handling issue when restoring stack
  after a failed attempt to load a modulefile in a modulefile.

* Failed attempt to load or unload a modulefile within a modulefile
  now leads to this upper modulefile load or unload failure.
  Previously upper modulefile were loaded respectively unloaded even
  if its dependent sub-modulefile failed to load or unload.

* During a "switch" command, if the unloading part fails the loading
  part will not be tried. Unloading part fails if module to unload
  does not exist or its unload interpretation raise error.

* Init: use "module source" rather shell command "source" to load
  modulerc system configuration in sh-kind, csh-kind and fish shell
  init scripts.

* Install: transform configuration options to bind to an existing
  compatibility Modules version into option (--enable-compat-version)
  to build and install this compatibility version along with main
  version.

* Init: adapt initialization scripts to handle both main and
  compatibility version. By default a shell script enables main
  version and if the environment variable MODULES_USE_COMPAT_VERSION
  is set to 1, the compatibility version is enabled instead of main
  version.

* Install: import from compatibility version and install
  "add.modules" and "mkroot" utility scripts (scripts developed by
  R.K. Owen).

* Install: update RPM spec file to handle compatibility version as a
  "compat" sub-package.

* Add completion script for Fish shell (contribution from BEFH).

* Doc: extend content of diff_v3_v4 to details all noticeable
  changes between v3.2 and v4.0.

* Doc: introduce MIGRATING guide to learn the major changes when
  moving from v3.2 to v4.0.

* Fix "list" command when full pathname modulefile is loaded (fix
  bug#132)

* Install: handle version number though git tags in scripts,
  documentation and RPM spec file.

* Doc: migrate documents from POD format to reStructuredText to
  benefit from Sphinx documentation framework and Read The Docs
  publishing capabilities.

Above changes describe the differences with modules-tcl release 1.923.
To learn about the changes between Modules 4.0 and last Modules 3.2
release, please see the MIGRATING document.


modules-tcl-1.923 (2017-07-20)
==============================

* Fix "aliases" command when a global or user RC file is set.

* Find and solve global or user RC aliases and symbolic versions on
  "search", "whatis" and "paths" commands.

* Do not look at currently loaded modules to resolve the target of a
  module alias.

* Rework default and latest versions search on "avail" command.
  Correct display when at a given level a sub-directory element is
  last element in directory among modulefiles. Previously sub-
  directory was printed but last file among modulefiles was also
  printed (2 latest versions at the same level). A directory tagged
  "default" does not appear anymore in default listing result as its
  content (the default version found in that directory) will be
  displayed.

* When an alias is set and overrides name of an existing directory,
  take this alias into account for default and latest choice and
  ignore directory content.

* Bad default set will lead to no result displayed for the
  corresponding module in case of default "avail" display.

* Correct inclusion of aliases in output result when these aliases
  are not part of the exact same module path than module path of the
  search.

* Rewrite existing shell initialization file with initadd,
  initprepend, initswitch, initrm and initclear commands rather than
  writing a new file then copying this new file to replace the
  existing initialization file. In addition only re-writes shell
  initialization file if its content need to be altered.

* Raise an error on initadd, initprepend, initswitch, initrm and
  initclear commands when no "module load" line are found in shell
  initialization file.

* Normalize error messages for the various collection-related
  commands when collection cannot be accessed.

* Cleanup existing reference counters of a path list variable when
  this variable is altered by a "setenv" or an "unsetenv" command.

* Init: do not pollute tab-completion with moduleraw command. (Bert
  Wesarg)

* Make use of the same Tcl interp for each modulefile interpretation
  and use another one for each modulerc (but the same for each
  modulerc). By doing so we proceed like on C-version where same
  interpreter is used across modulefile or modulerc interpretation.
  Huge performance improvement is achieved with this change on
  commands making intensive use of interp like "avail". Interpreter
  state is reset from one interpretation to another: the initial
  variable and procedure state is restored before each new
  interpretation to avoid spread of definitions from one
  interpretation to another. Also in case of nested interpretation
  each interpretation level has its own interpreter so a module loaded
  by another does not influence the interpretation of the module
  loading it.

* Improve performance of aliases and symbolic versions resolution by
  computing these resolution at definition time. As a consequence
  resolution loop are not registered anymore and produce an error
  message when spotted not at display time.

* Reduce number of "access" system call by trying access to
  modulefile when reading the content of a modulefile directory rather
  testing access before trying it.

* No error raise on empty argument list for load. To cope with
  initadd behavior that requires at least an empty "module load" line
  in startup files. (fix SF bug#88)

* Fix initadd to handle load line without trailing space. Was
  previously expecting load directive to be written "module load "  to
  get a match. With fix, "module load" line will also be matched.

* Like C-version catch raised error when break or continue are
  called from outside of a loop to handle them as when they are called
  from modulefile main body. (fix SF bug#87)

* Return error on "module use" command when an empty path string is
  provided rather ignoring it.

* Workaround "min" and "max" functions and "lreverse" procedure for
  correct operations under Tcl version 8.4.

* Install: add --with-tclsh configure option to give the ability to
  choose the Tcl interpreter shell to setup in initialization scripts.

* Handle error raised from the ModulesDisplay, ModulesHelp and
  ModulesTest procedures in the same way than for the evaluation of
  the modulefile content. An error occurring during the evaluation of
  the modulefile content will lead to no evaluation of the "display",
  "help" and "test" command specific functions.

* Remove "debug" module command

* Doc: describe "path", "paths" and "autoinit" module command.

* Correct use of xrdb tool when not installed in default path.

* Fix "init*" module commands to behave more like C-version and
  document remaining differences in diff_with_c-version.

* Init: make "sh" init script closer to POSIX specification to
  support sh flavors different than Bash or Zsh like Dash.

* Fix column-mode display for very short width terminal.

* Install: introduce an "install" non-regression testsuite which is
  triggered by the "make testinstall" command and checks modules-tcl
  installation is operational.

* Init: fix modulerc load test on "fish" init script.

* Init: fix interactive shell test on "sh" init script.

* Install: add --enable-example-modulefiles configure option that
  install by default some modulefiles provided as example in the
  system modulefiles directory.

* Install: when uninstalling, do not remove modulefiles directory if
  it is not empty.

* Add completion script for Zsh shell.

* Add "module test" command to trigger when called execution of a
  ModulesTest procedure in target modulefile following same kind of
  mechanism than "module help".


modules-tcl-1.832 (2017-04-29)
==============================

* Fix "getenv" sub-command to correctly return environment variable
  value.

* Clarify in man-pages display of module alias and symbolic version-
  name on "avail" command and management of file access issue when
  locating modulefiles.

* Distinguish access issue (permission denied) from find issue
  (cannot locate) when trying to access directly a directory or a
  modulefile as done on "load", "display" or "whatis" commands. In
  addition on this kind of access, not readable .modulerc files are
  ignored rather producing a missing magic cookie error.

* When mode is set to unload, "module load" commands in modulefile
  are interpreted as "module unload" commands. To guaranty correct
  behavior regarding requirements, the module list passed to the load
  command is reversed to unload the modulefiles in the reverse order
  than they have been loaded.

* Correct "display" command to only report module commands set in
  modulefile and not those set in the various .modulerc on the path
  toward this modulefile.

* Fix bash and tcsh completion scripts to eliminate symbolic version
  names from "avail" command result.

* Improve "avail" command when a symbolic version-name is passed as
  argument to return the modulefile target of this symbolic version-
  name.

* When looking for an implicit default in a directory, now a module
  alias is taken into account so it can be returned as the last
  element in it (highest numerically sorted version).

* Fix "list" command to correctly display the "default" tag along
  loaded modules when set via a .version file.

* Fix long output of "list" command to display the symbolic version-
  names associated to each loaded module if any.

* Improve "avail" command to return alias module when an alias name
  is passed as argument.

* On a "--default" listing, a modulefile does not appear anymore if
  a directory is set default at the same level. On a "--latest"
  listing, a directory does not appear anymore if set default but not
  the latest.

* Read modulerc and validate its header in a single open/read/close
  sequence instead of two in order to reduce to number of IO
  operations during an "avail" command.

* Drastically reduce grid size computation time which removes
  overhead when displaying module avail results in column-mode.

* Translate module name to currently interpreted module name when
  name correspond to the last part this interpreted module only in
  case of symbolic version-name or alias resolution.

* Avoid resetting regular path (/usr/bin) or manpath
  (/usr/share/man) when switching from Tcl to C version in switchml
  utility.

* Raise error on x-resource if DISPLAY environment variable is not
  set.

* Fix lisp init script which was broken for environment change
  actions.


modules-tcl-1.775 (2017-03-07)
==============================

* Improve README with examples, requirements, links, etc. Also
  update INSTALL documentation with details on the new
  configure/make/make install process.

* Add display of a release date next to the version number when
  calling for "--help" or "--version".

* Update diff_with_c-version document to describe the features of
  the Tcl-version that are not supported on the C-version. Also state
  that the diff takes C version 3.2.10 against Tcl version 1.729 as a
  basis.

* Introduce "switchml" tool, a shell function (or alias for csh or
  tcsh shells) that swap currently enabled Modules version (C or Tcl)
  by the other version (C or Tcl). Configure option "--with-cver-
  initdir" must be defined to enable "switchml" in initialization
  script.

* Define a PATH and MANPATH in shell initialization scripts that
  point to the defined modules-tcl installation directories.

* Give ability to generate distribution tarball from the git
  repository with Makefile "dist" target.

* Introduce an installation process for this software following the
  configure/make/make install fashion. Configure step enables to
  choose installation paths and init scripts features to activate.
  Make step mainly translates init scripts with the configuration set.
  Make install creates target directories and copy files into them.

* Fix MODULESHOME setup in autoinit command to define it as an
  absolute path and set it to the upper directory when modulecmd.tcl
  is located in a "bin" or a "libexec" directory.

* Correct alias and version resolution on avail command which was
  erroneous in case of a modulefile holding symbols (like "default")
  and targeted by aliases. Avail output was showing the aliases
  holding the symbols instead of the modulefile.


modules-tcl-1.729 (2017-02-01)
==============================

* Add documentation in module(1) man page on the modulefile
  collection concept and the relative "save", "restore", "saverm",
  "saveshow" and "savelist" commands.

* Add document to list the differences of the functionalities that
  can be found on the C-version of the Modules package compared to the
  Tcl-version.

* Improve modulecmd.tcl shebang to only search "tclsh" once if found
  in PATH.

* Add "module-info mode" check against "remove" and "switch" values.

* Introduce "module-info command" Modules-specific Tcl command to
  distinguish complex "load" or "unload" commands that cannot be
  determined with "module-info mode" alone. For instance a modulefile
  can now be aware that a "switch", a "restore" or a "purge" command
  is currently being run.

* Enable usage of "module-info" Modules-specific Tcl command from a
  modulerc file.

* Fix "module-info specified" Modules-specific Tcl command.

* No exit raise on modulefile or modulerc error during "avail",
  "aliases", "whatis" and "search" commands to avoid harming results
  from these global commands if error exists in a few modulefiles.

* Exit with error code when a critical error is encountered when
  interpreting a modulefile or a modulerc.

* Inhibit non-critical error report raised from modulefiles during
  "avail", "aliases", "whatis" and "search" commands to avoid error
  flood when parsing all modulefiles or modulercs.

* Handle multiple lines of "module-whatis" Modules-specific Tcl
  commands defined for the same modulefile.

* Handle multiple arguments passed to the "module-whatis" Modules-
  specific Tcl commands. They are joined to get a single line of text.

* Return error on "whatis" command if searched modulefile is not
  found.


modules-tcl-1.704 (2017-01-20)
==============================

* Set path variable counter to 1 for paths without a known reference
  count (was previously set to 999999999).

* Introduce "envml" utility which acts as an application launcher
  where module commands are instantiated to setup environment before
  launching the given application.

* Always register paths provided to be part of MODULEPATH
  environment variable as absolute paths to get independent from the
  current working directory.

* Inhibit next modulefiles interpretation with "exit" Modules-
  specific Tcl command only if current mode is "load".

* Add argument to "module-info shell" and "module-info shelltype" to
  test current shell or shelltype value.

* Fix use of "default" version-name to not consider it as a module
  symbol if a modulefile is named "default".

* Fix path variable counters when ":" character is used in elements
  of a path-like variable.

* Update module(1) and modulefile(4) man pages to clear content
  specific to the C version of Modules and add content specific to or
  adapt content that behave differently on this Tcl version.

* Fix TCLSH variable issue in Python init script.


modules-tcl-1.677 (2017-01-04)
==============================

* Make "switch" command handle a single argument. The modulefile to
  switch to is the one passed on the command-line and the modulefile
  to unload is assumed to be the currently loaded module with the same
  root name as this modulefile specified on the command-line.

* Make "switch" command idempotent by always ending up with "old"
  unloaded and "new" loaded, whatever the starting situation is.

* Fix "exit" Modules-specific Tcl command.

* Add "refresh" command as alias on "reload" command.

* Add dummy "module-log", "module-trace", "module-user" and "module-
  verbosity" Modules-specific Tcl commands to enable support for
  modulefiles using them.

* Fix "system" Modules-specific Tcl command  to behave like
  described on the man page.

* Fix "module list" when module loaded with full path

* Disable "g_force" property by default to avoid loading a
  modulefile already loaded. It also avoids path element reference
  counting to get increased when the same module is asked twice for
  load.

* Clarify module-info "mode" option and set "help" mode on "module
  help" command.

* Clarify module-info "flags" and "user" options.

* Handle empty or separator path on "add-path" ad "unload-path"
  commands.

* Delete environment variable targeted by an "unsetenv" command on
  "unload" mode if no value has been provided along. On display mode,
  print environment variable value if any has been passed to
  "unsetenv" command.

* When setting Tcl variable, enclose value within double quotes.

* Fix perl quoting style for variable set, escape single quotes
  rather double quotes.

* Call "unuse" command instead of "use" command on a "module
  unload".

* Fix "continue" Modules-specific Tcl command.

* Add "chdir" Modules-specific Tcl command.

* Fix "break" Modules-specific Tcl command.


modules-tcl-1.655 (2016-11-23)
==============================

* No display of modulepath header if no module found in it.

* Remove call to "module aliases" on "module avail" command, as
  aliases are now directly included in the "avail" results.

* Include module aliases in the displayed result of an "avail"
  command. Also display aliases defined in a global or user modulerc
  file.

* Exit with error code if error occurred on display or help
  commands.

* Fix module-info symbols resolution.

* Better handling of .modulerc and .version files when searching for
  a modulefile.

* Fix module-info version resolution.

* Fix module-info alias resolution.

* Register alias and version by the short module name and improve
  their resolution to avoid loop.

* Source $MODULERCFILE/modulerc when $MODULERCFILE is dir.

* Make it so you can do "module avail un", wildcard "*" character
  implied.


modules-tcl-1.632 (2016-09-06)
==============================

* Raise error if command does not receive the excepted number of
  arguments.

* Improve column-mode display to get a denser output on "avail"
  command.

* Standardize the output of Warning, Error, InternalBug and
  ErrorAndExit messages.

* Add short option -d for --delim on prepend-path.

* Introduce collection target concept to distinguish between
  machines, environments or domains that are incompatible with each
  other.

* Introduce "saveshow" command, to display content of saved
  collections.

* Improve "save" and "restore" commands to handle collection
  specified as absolute or relative file path.

* Introduce "saverm" command, to delete saved collections.

* Enable to "restore" collection with multiple modulefiles specified
  on the same line.

* Fix "restore" command when there is no module to load in
  collection.

* Fix "restore" command when collection fully rewind module paths.

* Fix "restore" command to preserve module path order set in
  collection.

* Raise error if try to save an empty environment in a collection.


modules-tcl-1.602 (2016-08-13)
==============================

* Add support for Fish shell.

* Import recent tests added to C-version on 10-use and 50-cmds
  testsuites.

* Add short option -d for --delim on append-path and remove-path.

* Fix load and implement unload x-resource.

* Fix Python code that was broken or not Python3-compliant. Fixed
  code is used to define the module command, to render error and to
  process x-resource.

* Always dictionary-sort (also called numerical-sort) list of
  modulefiles or list of collections.

* Fix bash completion script to be compliant with bash posix mode.


modules-tcl-1.578 (2014-12-24)
==============================

* First release to be described in this NEWS file but it does not
  mean this is the first version of modules-tcl as this Modules flavor
  is born in 2002.

* At this stage, modules-tcl handles a majority of the module
  commands and modulefile Tcl commands available on C version.